 Head Scratcher...Only 2 Injectors Firing, 74 2.0 (D-Jet) |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| BMartin914 |
 Apr 12 2007, 07:29 PM
Post
#1
|
|
|||  Group: Members Posts: 1,408 Joined: 30-May 04 From: Oregon Member No.: 2,128 Region Association: Pacific Northwest  |
I have a 74 2.0 w/ d-jet that is only firing 2 of the 4 injectors.
I have already: -swapped connectors on each side, problem moves with connectors -swapped trigger points, problem remains unchanged -checked continuity throughout system (injectors, trigger points, etc.) -case ground terminals brand new, female ground connectors have been cleaned Any suggestions (ideas) as to what may be causing this condition? I feel like I have been through most if not all of the appropriate troubleshooting procedures and still can't seem to put my finger on the problem. I have got to be missing something small... |
   |
 
|
  |
Replies
| JeffBowlsby |
Apr 12 2007, 10:26 PM
Post
#2
|
|
914 Wiring Harnesses Group: Members Posts: 8,533 Joined: 7-January 03 From: San Ramon CA Member No.: 104 Region Association: None 
|
Which two injectors...its important
If cyl 1-2 or 3-4 are not working then it may be grounds, injector pairs on each side of the engine share a common ground in the harness If cyl 1-4, or 2-3 (diagonal cylinders) are out, then its trigger points because those are the two injector groups they control. I suppose it could also be an ECU problem, but those seldom fail. Bad injector coils...maybe? Injectors simply plugged and need cleaning? A kink in the fuel line serving one set of injectors? |
|
|
|
Posts in this topic
BMartin914 Head Scratcher...Only 2 Injectors Firing Apr 12 2007, 07:29 PM
911quest On the two that are inop. have you checked for vol... Apr 12 2007, 07:38 PM r_towle suspect the wiring harness, then the relay board, ... Apr 12 2007, 07:45 PM john rogers Injector point, replace them with new only. Apr 12 2007, 08:26 PM swl I agree with John. Trigger points are about the o... Apr 12 2007, 09:59 PM Dave_Darling As the others have asked: Which two injectors?
T... Apr 12 2007, 10:23 PM boxstr Does'nt that year have the injector ballast re... Apr 12 2007, 10:26 PM BMartin914 Injectors are diagonally-opposed. Either 1 and 4 o... Apr 12 2007, 11:02 PM
swl
Either 1 and 4 or 2 and 3 depending on which dir... Apr 13 2007, 09:32 PM TROJANMAN ben,
didn't you have similar problems a year ... Apr 12 2007, 11:05 PM BMartin914
ben,
didn't you have similar problems a year... Apr 13 2007, 08:15 AM TROJANMAN
ben,
didn't you have similar problems a yea... Apr 13 2007, 09:29 AM BMartin914
[quote name='BMartin914' post='887955' date='Apr ... Apr 13 2007, 01:47 PM jasons If its the diagonal pairs, its got to be your trig... Apr 13 2007, 08:32 AM pbanders If you've swapped in known good trigger points... Apr 13 2007, 01:56 PM BMartin914 The trigger points, injectors and ecu are all fine... Apr 13 2007, 10:34 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th June 2024 - 04:25 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.