 Replace The Brake Lines, Where does the rubber attach? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| HalM |
 Sep 23 2007, 07:49 AM
Post
#1
|
|
Green Skull 003  Group: Members Posts: 127 Joined: 19-January 05 From: The 'Burg Member No.: 3,472 Region Association: None  |
I took the 914 to VIR for a 3 day DE this weekend. At the end of the second session, I noticed my brake pedal going closer and closer to the floor. No big deal, the South Course is notorious for being hard on brakes. I'll just bleed them and the world will be right?
Wrong. My buddy and I decided to bleed all four wheel. we started, of course, on the passenger side rear. As we were bleeding, we noticed an unusual drop of brake fluid on the rubber hose. We weren't sure where it was coming from, but we think it was the connection between the rubber hose and the hard line to the caliper. We moved to the driver's side and had the same thing happen, except there was more fluid and no idea where on the rubber line it was coming from. The brake pedal in the car never did start to firm up. Needless to say, I shut down the car for the rest of the DE. The pedal was good enough to get me 150 miles home. Now it looks to me like it is time to replace all 4 brake lines. I have a few questions. Rubber versus Stainless Steel. I have read a bunch of pro's and con's on SS. I have always had them on my Porsches. Any consensus among 914 owners on which is the better way to go? Anyone have a picture or diagram of where the rubber hoses attach to the m/c lines? I am thinking this a pretty simple DIY project. The car is used 50/50 for street and DE's. Anyone have a recommendation for pads? I am thinking Porterfield's right now. Thanks for any and all help. |
   |
 
|
  |
Replies
| PeeGreen 914 |
Sep 24 2007, 12:16 PM
Post
#2
|
|
Just when you think you're done...wait, there is more..lol Group: Members Posts: 10,219 Joined: 21-September 06 From: Seattle, WA... actually Everett Member No.: 6,884 Region Association: Pacific Northwest 
|
Oh, and to add to what the Cap'n said... spray those connections down with penatrant first and allow it to soak. You don't want to break/ crack any of your hard lines.
|
|
|
|
Posts in this topic
HalM Replace The Brake Lines Sep 23 2007, 07:49 AM
Dave_Darling It should be reasonably obvious where the lines ho... Sep 23 2007, 12:29 PM John Jentz Use rubber lines or Cap't Krusty will reach th... Sep 23 2007, 12:32 PM HalM Thanks guys. This is exactly the info I was looki... Sep 23 2007, 12:39 PM type47 replacing brake lines should be really easy. i wou... Sep 23 2007, 02:23 PM Eric_Shea
:rotfl: "should" being the key operat... Sep 23 2007, 05:07 PM
type47
:rotfl: "should" being the key opera... Sep 24 2007, 01:43 PM Dave_Darling ...but if it's removing the rubber flexible ho... Sep 25 2007, 10:38 AM Cap'n Krusty ...............and then I'll slap you for BEIN... Sep 24 2007, 11:57 AM Bass Fisher Even with the proper tools, a frozen nut can cause... Sep 24 2007, 06:13 PM HalM And so for me, the bottom line is the car is at Eu... Sep 24 2007, 09:20 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 14th July 2025 - 02:47 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.