Real time djet help needed!, High idle |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Real time djet help needed!, High idle |
championgt1 |
Jan 26 2008, 01:43 PM
Post
#1
|
Don't embarrass me Filmore! Group: Members Posts: 2,680 Joined: 3-January 07 From: Tacoma, Washington Member No.: 7,420 Region Association: Pacific Northwest |
Items noted 1:Using Dave Darling's diagram the line coming off the throttle body to the cap side port of the vacuum advance unit is plugged with a screw and not connected to the vacuum advance unit shown in top of picture. Does this line need to be connected to the cap side port of the vacuum advance unit? 2: The line from the back of the vacuum advance line is omited because the car is a 74 and does not have a port on the throttle body. |
Bleyseng |
Jan 26 2008, 09:34 PM
Post
#2
|
Aircooled Baby! Group: Members Posts: 13,035 Joined: 27-December 02 From: Seattle, Washington (for now) Member No.: 24 Region Association: Pacific Northwest |
The PCV connects to the plenum port
AAR valve connects to the air filter port Whats connected to the plenum port? 3k idle is usually too much air coming into! misconnected hoses is my guess... I think if the TPS is stuck to WOT it would flood the engine (too rich) as you need the extra air to get that idle rpm |
Lo-Fi Version | Time is now: 1st June 2024 - 08:20 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |