 Castellated Nut, How do you loosen the sucker |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tuff914 |
 Oct 23 2009, 02:06 AM
Post
#1
|
|
Member  Group: Members Posts: 67 Joined: 6-May 08 From: Australia Member No.: 9,020 Region Association: None  |
Is there a secret to the castellated nut on the back wheel, I'm using a
3 ft breaker bar and all I'm achieving is bending my sidchrome "T" socket handle. Anyone know of a trick to cracking it. Thanks in advance John |
   |
 
|
Posts in this topic
tuff914 Castellated Nut Oct 23 2009, 02:06 AM
cwpeden Take out the cotter pin?
Or a good solid impact g... Oct 23 2009, 02:58 AM zymurgist PB Blaster (or your equivalent penetrating oil) an... Oct 23 2009, 06:37 AM SLITS 1/2" breaker bar, socket and about a 3' s... Oct 23 2009, 08:08 AM tradisrad That bolt is torqued to 250 lbs. It can be tough t... Oct 23 2009, 08:34 AM GeorgeRud I also found that a metal pipe that's fitted o... Oct 23 2009, 08:41 AM Gigamight Sorry to hijack, but I was going to start a simila... Oct 23 2009, 10:12 AM aircooledtechguy This is the tool I used to remove these from a par... Oct 23 2009, 10:47 AM brp986s If you're hopping on your cheater and your bre... Oct 23 2009, 10:52 AM
Vacca Rabite
If you're hopping on your cheater and your br... Oct 23 2009, 04:03 PM Cap'n Krusty I use a 4 ft long piece of 2 inch angle iron, dril... Oct 23 2009, 11:29 AM GeorgeRud I forgot to include in my post that you do need to... Oct 23 2009, 12:26 PM Elliot Cannon Use a 3/4 inch breaker bar, a 4 foot extension pip... Oct 23 2009, 01:32 PM DBCooper If you've done all of the above and that pig s... Oct 23 2009, 01:42 PM jhadler
Keep this in mind when you're bouncing up and... Oct 23 2009, 03:32 PM 6freak BIG BALLS :lol4: IF YOU DONT HAVE THEM TAKE YOUR N... Oct 23 2009, 01:42 PM jhadler Except for the part that actually broke under load... Oct 23 2009, 06:09 PM Jeffs9146 I went to a tool rental place and rented a 3/4 imp... Oct 23 2009, 06:44 PM DBCooper Now THAT'S what works!!! More hor... Oct 23 2009, 09:18 PM type2man
Problem solved.....36mm welded onto an iron ... Oct 24 2009, 05:51 PM Cap'n Krusty That's fine for a 356 or an old VW bug, but mo... Oct 24 2009, 06:16 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th December 2025 - 05:10 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.