 Fusor Metal Adhesive, Bonding longs and long clamshells |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 69_Lex |
 Oct 31 2009, 07:49 AM
Post
#1
|
|
Member  Group: Members Posts: 52 Joined: 28-June 08 From: wyoming Member No.: 9,226 Region Association: None  |
Has anyone had any good or bad experiences using Fusor Metal Adhesives? I'm considering using it to bond my outer longs on and the long clamshells on. Then using structural rivets to prevent the unzippering effect of the bonded surfaces.
Pros I've read 1. Metal adhesives shear strength is greater than spot welds or the sheet metal being bonded. 2. Provides corrossion protection on surfaces being bonded (bonded surface) 3. No warping of metals, unlike welding. Cons I've read 1. Bonded surfaces can unzip, which is why a spot weld or rivets ar needed along bonded seam. 2. Don't let it get into areas that you don't want bonded or filled. Any thoughts are appreciated. |
   |
 
|
Posts in this topic
69_Lex Fusor Metal Adhesive Oct 31 2009, 07:49 AM
Vacca Rabite Sounds new fangled. I's sceered
It may be st... Oct 31 2009, 08:37 AM JazonJJordan :agree: Have to see results; test- proven- trued a... Oct 31 2009, 08:44 AM Bartlett 914 This looks very interesting. You can even weld and... Oct 31 2009, 09:42 AM
JazonJJordan Yes, I was referring to the Weld Bond Procedure ad... Nov 1 2009, 01:18 AM kwales As ever, a glue joint is no better than the surfac... Oct 31 2009, 10:28 AM sww914 That stuff is designed to bond outer panels, not t... Oct 31 2009, 10:49 AM balljoint A friend who worked for 3M was on a flight and in ... Oct 31 2009, 11:51 AM brer Used correctly its great stuff. Knowing the corre... Oct 31 2009, 01:04 PM 69_Lex My only concern is that the metal around the rivet... Oct 31 2009, 08:31 PM Joe Owensby Everything has its place. Adhesive joints are gr... Oct 31 2009, 09:35 PM sean_v8_914 I bond all my 914 panels with Miller instant glue ... Oct 31 2009, 10:24 PM 69_Lex Does anyone have any input on the riveting. Is or ... Oct 31 2009, 10:29 PM 69_Lex Here are two rivets I've found that has good s... Nov 1 2009, 03:46 AM 9146986 Those clamshell stiffeners should be WELDED on... Nov 1 2009, 09:10 AM kwales Pretty piss poor metal properties for those rivets... Nov 1 2009, 12:29 PM ghuff This reminds me of glued together ebay turbos.
ht... Nov 1 2009, 09:03 PM 69_Lex Does anyone have any good ideas on a mechanical fa... Nov 1 2009, 09:12 PM rick 918-S Air frames are riveted because the metal expands a... Nov 1 2009, 10:28 PM brant I used fusor all over on my race car project.
(2 t... Nov 1 2009, 11:09 PM 69_Lex
I used fusor all over on my race car project.
(2 ... Nov 2 2009, 10:28 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 23rd May 2024 - 06:22 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.