 Engine test stand question, How to wire alternator |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Cevan |
 Dec 24 2009, 09:33 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,079 Joined: 11-December 06 From: Western Massachusetts Member No.: 7,351  |
As I sit here removing head studs from my case halves wondering what the hell I have done with engine parts scattered over several square feet of my cellar, I decided I would do the initial cam break-in on my engine/tranny dolly.
How does one connect the alternator? The alternator has one heavy gauge wire that goes to the starter and a 3 wire plug that goes to the voltage regulator on the relay board. Is the relay board/voltage regulator needed for the engine test stand? |
   |
 
|
Posts in this topic
Cevan Engine test stand question Dec 24 2009, 09:33 AM
aircooledtechguy It's not necessary to hook it up at all unless... Dec 24 2009, 09:55 AM MrLeeS I agree, if you have doubts as to the functioning ... Dec 24 2009, 10:06 AM Spoke When I tested my engine on a stand, I just used th... Dec 24 2009, 10:18 AM ejm Just leave the belt off. Dec 24 2009, 11:34 AM Cevan A consensus!! Excellent! Thanks ever... Dec 24 2009, 12:16 PM
r_towle Another option is to rig up the relay board with t... Dec 24 2009, 12:23 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 01:36 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.