 may have a problem, pertronix opinions?? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| sixers34926 |
 Mar 8 2010, 09:46 PM
Post
#1
|
|
Member  Group: Members Posts: 83 Joined: 11-February 10 From: Phoenix, AZ Member No.: 11,352 Region Association: None  |
so i finally got the car running but i have to have the ignition wires different than i was told to have them.In stead of the #1 wire being over the tdc mark in the distributor the #1 wire is 90 degrees before that. will this be a problem?? when i do try to start the car up with the wires in the right order i hear a huge pop sound and it never starts up. thats why i just have them all shifted 90 degrees. will my car still be fine like this? and also how do i time the car if the wires aren't right?
|
   |
 
|
Posts in this topic
sixers34926 may have a problem Mar 8 2010, 09:46 PM
SirAndy
so i finally got the car running but i have to ha... Mar 8 2010, 09:51 PM
underthetire
Ya, i caught that one to. :WTF: Mar 8 2010, 09:55 PM sixers34926 i have new idea who built the motor but the tdc ma... Mar 8 2010, 09:54 PM underthetire All yours andy....... Mar 8 2010, 09:56 PM SirAndy I had a motor where the builder installed the dizz... Mar 8 2010, 10:01 PM sixers34926
I had a motor where the builder installed the diz... Mar 8 2010, 10:10 PM tod914 Here's a quicky diagram. Should help.
Mar 8 2010, 10:33 PM sixers34926
Here's a quicky diagram. Should help.
to... Mar 8 2010, 10:36 PM tod914 sixer, sorry no idea. Mar 8 2010, 10:40 PM underthetire The notch on the dist is there just to locate the ... Mar 8 2010, 10:42 PM sixers34926
sixer, sorry no idea.
thanks anyways the attemp... Mar 8 2010, 10:42 PM JRust Been a while but that looks messed up to me. Aren... Mar 8 2010, 10:44 PM sixers34926
The notch on the dist is there just to locate the... Mar 8 2010, 10:44 PM underthetire
The notch on the dist is there just to locate th... Mar 8 2010, 10:46 PM sixers34926
Been a while but that looks messed up to me. Aren... Mar 8 2010, 10:46 PM sixers34926
[quote name='sixers34926' post='1284289' date='Ma... Mar 8 2010, 10:48 PM JRust Must be that mine has 8 cylinders :D
Okay my oth... Mar 8 2010, 10:49 PM underthetire Do you have a dwell meter? Mar 8 2010, 10:50 PM sixers34926
Do you have a dwell meter?
yes i do Mar 8 2010, 10:51 PM underthetire Then I would do it. I find it much easier to chang... Mar 8 2010, 10:55 PM sixers34926 what do you mean by electronics? and i wont be a d... Mar 8 2010, 10:57 PM underthetire
what do you mean by electronics? and i wont be a ... Mar 8 2010, 11:02 PM 76-914 OK, I missed it. What did you set your timing to? ... Mar 8 2010, 11:00 PM sixers34926
OK, I missed it. What did you set your timing to?... Mar 8 2010, 11:02 PM tod914 Did you have the rotor pointing to the notch where... Mar 8 2010, 11:03 PM sixers34926
what do you mean by electronics? and i wont be a... Mar 8 2010, 11:05 PM underthetire
[quote name='underthetire' post='1284309' date='M... Mar 8 2010, 11:08 PM 76-914 OK. Be sure your valves are set right then time it... Mar 8 2010, 11:10 PM sixers34926
[quote name='underthetire' post='1284309' date='... Mar 8 2010, 11:13 PM sixers34926
OK. Be sure your valves are set right then time i... Mar 8 2010, 11:16 PM underthetire Just don't get the empi version. You'll be... Mar 8 2010, 11:20 PM sixers34926
Just don't get the empi version. You'll b... Mar 8 2010, 11:22 PM underthetire
Just don't get the empi version. You'll ... Mar 8 2010, 11:23 PM Gint It doesn't matter is the distributor drive gea... Mar 9 2010, 09:20 AM type47 My thought is the drive gear being out of position... Mar 9 2010, 10:24 AM vsg914 Gint nailed it. Your diz drive gear is misaligned.... Mar 9 2010, 10:44 AM sixers34926 whats everyones opinion on pertronix Mar 10 2010, 09:29 PM sixers34926
Gint nailed it. Your diz drive gear is misaligned... Mar 10 2010, 09:30 PM 76-914
Gint nailed it. Your diz drive gear is misaligne... Mar 11 2010, 08:39 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 06:40 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.