 Generators and power requirements |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Rand |
 May 13 2010, 08:19 AM
Post
#1
|
|
Cross Member  Group: Members Posts: 7,411 Joined: 8-February 05 From: OR Member No.: 3,573 Region Association: None  |
Want to run power tools and a light-duty welder - just a 110-powered flux-core. I know there's math to calculate power requirements, but there are also variables about how long you can run it continuously and all that. So I thought I'd see if those with experience would chime in.
I don't need heavy duty. But I don't want to be worried about when I have to stop and let things cool down. Just for argument's sake, let's use Harbor Freight as an example... Say you have this 90-amp welder: http://www.harborfreight.com/90-amp-flux-w...lder-98871.html Out of these generators, which could and could not handle it? http://www.harborfreight.com/engines-gener...generators.html |
   |
 
|
Posts in this topic
Rand Generators and power requirements May 13 2010, 08:19 AM
jmill 120 volts x 15 amps = 1800 watts. Those 7000 watt... May 13 2010, 08:23 AM Rand If it's that simple then the 2200 watt generat... May 13 2010, 08:32 AM PRS914-6 Rand, it doesn't take a large generator to run... May 13 2010, 08:42 AM Rand So the grinder is going to be a tougher client tha... May 13 2010, 08:52 AM
PRS914-6
So the grinder is going to be a tougher client th... May 13 2010, 09:26 AM
Spoke
So the grinder is going to be a tougher client th... May 13 2010, 10:37 AM underthetire I can tell you first hand that the 90 amp HF flux ... May 13 2010, 09:19 AM DonTraver Rule #1 with generators.
Calculate continuous loa... May 13 2010, 10:43 AM underthetire
Rule #1 with generators.
Caluculate continuous l... May 13 2010, 10:45 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 01:40 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.