 Corner balance, any tips? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tradisrad |
 Jan 10 2011, 03:22 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 985 Joined: 11-September 06 From: San Mateo, CA Member No.: 6,815 Region Association: Northern California  |
I am going to corner blance my 914 in the next week or so and I am looking for any tips that my help.
I picked up a set of Mad Racing scales, a Longacre caster/camber gauge and toe plates off of CL for $200. After I purchased said items I could not find a lot of info on the Mad Racing scales:  I did find that folks don't like these scales especially when compared to the Longacre digital scales. It also seems that there is a question about repeatability and accuracy with this type of scale. But they are what I have. So, I would appreciate any advice on using these scales as well as the camber/caster gauge & toe plates. My suspension set up is: Elephant Poly Bronze x 4 GPR front bar Stock torsion Upper front monoballs 150lb Eibach springs w/ ground control Bilstein shocks x 4 Turbo tie rods & bump steer. |
   |
 
|
Posts in this topic
tradisrad Corner balance Jan 10 2011, 03:22 PM
SirAndy I am going to corner blance my 914 in the next wee... Jan 10 2011, 03:37 PM tradisrad Andy, Thanks. I hope it is as easy as you make it ... Jan 10 2011, 04:48 PM
SirAndy Rich at HPH said that my alignment should not be t... Jan 10 2011, 04:51 PM jjackson In our experience-corner balancing after alignment... Jan 10 2011, 05:05 PM tradisrad Should I bring my car back to the specs that it is... Jan 10 2011, 05:24 PM jjackson
Should I bring my car back to the specs that it i... Jan 10 2011, 05:32 PM strawman I used a similar "fulcrum-based" lever s... Jan 10 2011, 07:33 PM r_towle If you dont have rear threaded perches, you can on... Jan 10 2011, 07:44 PM tradisrad I spent some time last weekend playing with the co... Jan 18 2011, 01:18 PM SirAndy 1. is it possible that my car is not square from t... Jan 18 2011, 02:21 PM Borderline There's another theory of corner balance that ... Jan 18 2011, 08:11 PM tradisrad after a few weeks time and sorting out some suspen... Feb 19 2011, 12:49 PM sean_v8_914 did you have slider plates under each wheel? Feb 19 2011, 01:05 PM tradisrad slider plates?
I have a set of 4 scales, arms, bal... Feb 19 2011, 01:21 PM McMark If you jack up the car, you need to roll the car t... Feb 19 2011, 01:53 PM tradisrad Thanks Mark.
The lever arms for the scales do have... Feb 19 2011, 02:17 PM sean_v8_914 square metal plate about 15 x 15 on top of similar... Feb 19 2011, 03:12 PM sean_v8_914 rubber bushings and this sweep conspire against go... Feb 19 2011, 03:19 PM tradisrad i've got elephant poly bronze on all 4 corners... Feb 19 2011, 07:09 PM PRS914-6 The tires and wheels need to "float" or ... Feb 19 2011, 09:09 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 5th June 2024 - 10:19 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.