Funky Valve Seat- WTF? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Funky Valve Seat- WTF? |
tornik550 |
Mar 1 2011, 08:36 PM
Post
#1
|
Senior Member Group: Members Posts: 1,248 Joined: 29-January 07 From: Ohio Member No.: 7,486 Region Association: None |
A long time ago, I purchased some heads online. They were bus heads that were supposedly ported to accept 38mm exhaust valves. I got the heads and they were total crap. When I took the springs and valves off, I found that the exhaust ports were completely stock. The valve seat was odd- the base was as narrow as the stock port and it angled out to 38mm so that it could accept a larger valve. Why? Correct me if I am wrong but it seems like if the port is the stock size- a 33mm or 38mm valve would have about the same flow if not less with the larger valve.
Is there something that I am missing or is this as dumb of a head job as Clinton/Lewinski? (I am posting this for educational purposes- I have several usable heads. These are trash as far as I am concerned) Attached image(s) |
Lo-Fi Version | Time is now: 5th June 2024 - 06:34 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |