 Trouble getting into fourth gear..., problem solved: dang cone screw |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| FourBlades |
 Mar 3 2011, 07:31 PM
Post
#1
|
|
From Wreck to Rockin  Group: Members Posts: 2,055 Joined: 3-December 07 From: Brevard, FL Member No.: 8,414 Region Association: South East States 
 |
I drove around last weekend for 90 minutes or so and I started having trouble getting
the transmisssion into fourth gear. I would go over all the way then up and I would be in second. If I went into neutral and worked the shifter back and forth, then I could carefully get into fourth again. Once there, it would go right into fifth. Today, with the car cold, it would go right into fourth no problem. I have never experienced this before even on long drives. Any ideas what is going on? Thanks, John |
   |
 
|
Posts in this topic
FourBlades Trouble getting into fourth gear... Mar 3 2011, 07:31 PM
FourBlades No one has any ideas??? Mar 3 2011, 10:36 PM underthetire Trans mounts? Mar 3 2011, 10:59 PM McMark Check the basics. Inspect bushings and :agree: mo... Mar 4 2011, 01:36 AM Dr Evil John, is this the box that you rebuilt at the clin... Mar 4 2011, 03:02 AM FourBlades Yes, this is the box I built at your atlanta clini... Mar 4 2011, 07:56 AM
Dr Evil
Could I need a rotational adjustment at the fire... Mar 4 2011, 11:22 AM FourBlades Problem solved: the cone screw at the firewall ju... Mar 4 2011, 01:28 PM davep It is always a good idea to have a NEW spare handy... Mar 4 2011, 01:45 PM BRAVE_HELIOS
Problem solved: the cone screw at the firewall j... Mar 4 2011, 02:48 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 01:47 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.