 ? missing bolts from front end?, why would the PO do this? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Ductech |
 May 16 2011, 01:06 PM
Post
#1
|
|
Member  Group: Members Posts: 356 Joined: 16-July 10 From: AridZona Member No.: 11,949 Region Association: Southwest Region  |
So after jacking up the front end and looking around i noticed that the two pieces of strap steel that go back from the torsion housing. their should be two bolts there. One on each strap. I worked up auto atlanta's site and found the part in question. they list as such 900 075 040 02 Hexagon-Head Bolt M 10 X 20 so if im not totally retarded that a 10 mm shank, and it is 20mm long. but what is the thread pitch is my real question. cause i would like to go to a hardware store instead of ordering it over the net and waiting.
Thanks for helping with mid day retardedness |
   |
 
|
Posts in this topic
Ductech ? missing bolts from front end? May 16 2011, 01:06 PM
SirAndy why would the PO do this?
There's a belly pan ... May 16 2011, 01:25 PM
Ductech
why would the PO do this?
There's a belly pan... May 16 2011, 01:38 PM poorsche914 So after jacking up the front end and looking arou... May 16 2011, 01:40 PM Cap'n Krusty Since no one else has bothered to answer your ques... May 16 2011, 02:05 PM SirAndy Since no one else has bothered to answer your ques... May 16 2011, 02:07 PM windforfun I replaced my belly pan & rubber seals with re... May 16 2011, 02:11 PM enderw88
but what is the thread pitch is my real question... May 16 2011, 02:15 PM Ductech Thanks Capn I knew a guru from here would know why... May 16 2011, 02:25 PM sww914 Almost every thing on these cars is either 6X1, 8X... May 16 2011, 05:42 PM balljoint I have a great thread pitch gauge and bolt size ga... May 17 2011, 04:42 AM jaxdream While we are on the subject of suspension bolts , ... May 17 2011, 08:12 AM ArtechnikA
While we are on the subject of suspension bolts ,... May 19 2011, 05:23 AM jaxdream
While we are on the subject of suspension bolts ... May 19 2011, 08:56 AM Bartlett 914 Do not jump to conclusions about standard and fine... May 17 2011, 08:42 AM Cap'n Krusty
Do not jump to conclusions about standard and fin... May 17 2011, 09:05 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2024 - 05:56 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.