 need to fix a stripped CHT hole, I only have myself to blame |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| brant |
 Jul 10 2011, 11:01 PM
Post
#1
|
|
914 Wizard  Group: Members Posts: 11,641 Joined: 30-December 02 From: Colorado Member No.: 47 Region Association: Rocky Mountains 
 |
about 3 years back I tore a motor down to rebuild my rebuild.... (long story)
anyways, I only have myself to blame today I started bolting on the externals and tin found out that the CHT hole is stripped. motor is assembled and I really don't want to pull the head at this point for welding...... how do folks feel about a time sert or a heli coil in this application. I think I happen to have a heli-coil in the right size... but if I had to buy a time-sert to make it conduct the heat into the sensor I would do it. what do folk think? John, how would you tackle this repair? thanks in advance everyone. brant |
   |
 
|
Posts in this topic
brant need to fix a stripped CHT hole Jul 10 2011, 11:01 PM
McMark Helicoil would be fine. Brad Anders has found tha... Jul 10 2011, 11:25 PM sean_v8_914 the hole is shallow. you will need a bottom tap Jul 10 2011, 11:31 PM brant Thanks Guys!
I think the heli-coil taps are ... Jul 11 2011, 08:12 AM r_towle buy a tap, grind off the tip until its flat and th... Jul 11 2011, 08:49 AM brant luckily the motor is still on the stand.
I was doi... Jul 11 2011, 09:11 AM Cap'n Krusty I just looked on the web, and I don't think He... Jul 11 2011, 10:10 AM
AvalonFal Used a TimeSert to do the same thing. I had to dri... Jul 11 2011, 04:45 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th June 2024 - 03:25 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.