 Early 911/912 "M" calipers, direct bolt on to a '70 914? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tradisrad |
 Aug 4 2011, 01:34 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 985 Joined: 11-September 06 From: San Mateo, CA Member No.: 6,815 Region Association: Northern California  |
I am looking for an upgrade to my front stock calipers and the "M" caliper for solid rotors seems to be a good choice. The car has a 19mm master cylinder and the braking could be better and instead of replacing the master cylinder with a 17mm I thought I'd upgrade the front calipers.
From what I can tell early 911/912 calipers for solid rotors will be a direct bolt on to the early 914 strut. I also think they use the same brake pad. Has any one done this or can someone confirm that they will be a direct bolt on and is the pad size the same? thanks -Rob |
   |
 
|
Posts in this topic
tradisrad Early 911/912 "M" calipers Aug 4 2011, 01:34 PM
SLITS Eric has to chime in ... I think the offset is dif... Aug 4 2011, 05:47 PM ArtechnikA
I am looking for an upgrade to my front stock cal... Aug 4 2011, 05:48 PM tradisrad My understanding of the 19mm master with the stock... Aug 4 2011, 06:22 PM 914Sixer Get a stock 17mm master cylinder and put some GOOD... Aug 4 2011, 08:21 PM Eric_Shea
They bolt right on. Good choice? Same size pad... Aug 4 2011, 10:11 PM brant the right pad makes stock calipers VERY VERY good.... Aug 4 2011, 10:23 PM tradisrad Thanks for the replies.
I do have good pads, R4S, ... Aug 5 2011, 07:54 AM Eric_Shea Not trying to sell a set of pads but... 914 brakes... Aug 5 2011, 07:24 PM Dave_Darling Remember: Brakes stop the wheels.
TIRES stop the... Aug 5 2011, 09:14 PM tradisrad Eric, I did pick up some rear pads last night. I a... Aug 6 2011, 08:52 AM
jmill
PMB seems to have good prices.
If he's got ... Aug 6 2011, 10:37 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 10:57 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.