 Spongy brakes, 914-4 brakes won't firm up??! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Gearren |
 Jul 19 2004, 04:59 AM
Post
#1
|
|
Member  Group: Members Posts: 91 Joined: 18-July 04 From: New Bern, NC Member No.: 2,362  |
I've had it! I have done everything to the brakes on my car, and I can't seem to get them to stop the car with authority. Best I get is a reluctant coast to a stop. Hardly suitable for street use! I have owned the 73 2.0 since new, and have kept it in the garage since 85. Brakes have always been weak, so as I starterd on the quest to revive the car, the brakes were top on the list. I have rebuilt both front and rear calipers, turned the rotors, new pads, new M/C (17mm), bled the m/c, bled the prop valve, and bled the system at least 10 times! I still have weak/spongy brakes! I want to keep the car stock, however I am tempted to remove the prop valve to see if it is the culprit. Any ideas or suggestions would be appreciated??
|
   |
 
|
Posts in this topic
Gearren Spongy brakes Jul 19 2004, 04:59 AM
ArtechnikA didn't see that you adjusted the parking brake... Jul 19 2004, 05:39 AM smg914 I'm not saying I recommend you remove the prop... Jul 19 2004, 09:06 AM seanery If the car has been sitting, the rubber lines coul... Jul 19 2004, 09:15 AM SLITS :agree:
Change the rubber brake lines and see wh... Jul 19 2004, 09:21 AM davep :agree:
I use new rubber lines, a 19mm master, a... Jul 19 2004, 11:07 AM Gearren I neglected to say that I did set the venting clea... Jul 19 2004, 01:46 PM ArtechnikA <... Jul 19 2004, 01:54 PM lapuwali Pad material can make a significant difference. ... Jul 19 2004, 01:59 PM seanery :agree: with james. Jul 19 2004, 02:02 PM davep The early stainless lines were not DOT. They tende... Jul 19 2004, 02:11 PM tat2dphreak I did not see this mentioned (though I did just "s... Jul 19 2004, 02:13 PM mike_the_man I'm in about the same boat as you. I would re... Jul 19 2004, 02:20 PM Eric_Shea I have a couple good proportioning valves if you w... Jul 19 2004, 02:28 PM Gearren I guess my plan of attack is to readjust the venti... Jul 19 2004, 03:21 PM phantom914 Why hasn't anyone recommended specific pads? I... Jul 19 2004, 04:02 PM ArtechnikA   |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 14th June 2024 - 02:57 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.
| All rights reserved 914World.com © since 2002 |
|
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |