 3.2 wiring dilemma, where does yellow #4 dme wire go? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| brp986s |
 Nov 29 2011, 02:21 PM
Post
#1
|
|
Member  Group: Members Posts: 434 Joined: 27-September 07 From: los angeles Member No.: 8,167  |
3.2 DME schematic shows a yellow wire from the ignition switch to position #4 on the DME box. But that's for a 911 and this is for a 914 so I don't have that switch and don't know what that wire has and under what condition.
I thought it might be the same as the yellow wire to the starter solenoid. When I make that connection the engine won't start with the ignition switch, but if I use my remote starter switch across the starter relay with key "on", the engine will start and run fine. Anybody know what's going on here (besides my not knowing wht the heck is going on) ? (IMG:style_emoticons/default/hissyfit.gif) |
   |
 
|
Posts in this topic
brp986s 3.2 wiring dilemma Nov 29 2011, 02:21 PM
Cap'n Krusty Sounds like you may be picking up power from the w... Nov 29 2011, 02:51 PM
brp986s
Sounds like you may be picking up power from the ... Nov 29 2011, 04:22 PM jcd914
Sounds like you may be picking up power from the... Nov 29 2011, 05:21 PM John
Sounds like you may be picking up power from the... Nov 29 2011, 09:02 PM Jeffs9146 I ran a relay from my fuel pump wire to power my i... Nov 29 2011, 02:58 PM jcd914 The 2 3.2L diagrams I looked at both show the yell... Nov 29 2011, 04:16 PM Series9 Here: Nov 29 2011, 05:37 PM Series9
Here:
Edited to seem less picky :) Nov 29 2011, 09:12 PM jim912928 On my iPhone so too hard to search. I have a thre... Nov 29 2011, 08:17 PM jim912928 Found the link:
http://www.914world.com/bbs2/inde... Nov 29 2011, 08:23 PM brp986s Mr. O'brien, your diagram is great. I thank y... Nov 29 2011, 09:36 PM jim912928 Joe...I'm not debating the solution....I actua... Nov 29 2011, 10:20 PM Series9
Joe...I'm not debating the solution....I actu... Nov 30 2011, 08:13 AM Racer Chris Does anyone know how to wire a Carrera tach in a 9... Nov 30 2011, 10:59 AM Series9
Does anyone know how to wire a Carrera tach in a ... Nov 30 2011, 12:11 PM Racer Chris Thanks Joe! Nov 30 2011, 12:25 PM brp986s North Hollywood Speedometer will convert a non-DME... Nov 30 2011, 01:50 PM brp986s This is baffling. DME#4 is getting +10.0 V while ... Dec 4 2011, 08:39 PM John
This is baffling. DME#4 is getting +10.0 V while... Dec 5 2011, 08:36 PM Steve I guess I was lucky. I just took the Haynes 914 a... Dec 4 2011, 09:12 PM brp986s John, thanks for offering. I made some measuremen... Dec 6 2011, 12:41 AM Series9 When everything is hooked up normally, 10v to the ... Dec 6 2011, 06:54 AM jcd914 There is a lot of great info in this thread! :... Dec 6 2011, 06:52 PM John
There is a lot of great info in this thread! ... Dec 6 2011, 11:46 PM Racer Chris
It also COULD be a bad ignition switch....
:agr... Dec 7 2011, 06:11 AM brp986s
It also COULD be a bad ignition switch....
:ag... Dec 7 2011, 10:11 AM brp986s
It also COULD be a bad ignition switch....
:ag... Dec 7 2011, 08:48 PM John
:trophy: No 12v at relay 86 or 85b at key sta... Dec 8 2011, 10:40 PM John So is your car working correctly now? Dec 31 2011, 12:01 AM brp986s Yeah, don't you hate how threads evolve to cli... Dec 31 2011, 12:47 PM John
Yeah, don't you hate how threads evolve to cl... Dec 31 2011, 03:38 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 09:20 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.