 '75 teener brake problem, my calipers don't match the rebuild kits |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| BritCarJim |
 Feb 6 2012, 10:25 PM
Post
#1
|
|
Member  Group: Members Posts: 98 Joined: 22-January 12 From: Sevierville, TN Member No.: 14,043 Region Association: South East States  |
the car i have is a '75 (built in nov-ish of '74). it has the 1.8 engine in it. the calipers on my workbench came off the car. i've rebuilt the back calipers; they're good. the front calipers have me stuck. i've ordered rebuild kits from 2 different suppliers (one a import specialist and on a chain) and they've both come back the same...with the seals too big for the bore on my calipers. i'm stumped. suggestions?
|
   |
 
|
Posts in this topic
BritCarJim '75 teener brake problem Feb 6 2012, 10:25 PM
Cairo94507 Maybe someone upgraded the fronts. I would shoot ... Feb 6 2012, 10:29 PM
SirAndy Maybe someone upgraded the fronts. I would shoot ... Feb 6 2012, 10:35 PM 914Sixer Seals should be bigger that the cylinder the fit i... Feb 6 2012, 10:47 PM Eric_Shea Stop ordering kits from RockAuto. :D
Seriously, ... Feb 6 2012, 11:16 PM BritCarJim the kit was ordered from a specialty import place.... Feb 7 2012, 07:50 AM vsg914 Jim, stop buying parts from those "specialty... Feb 7 2012, 08:11 AM rnellums :agree: That was my biggest realization after join... Feb 7 2012, 08:21 AM rick 918-S These are not Brit cars. When you order parts from... Feb 7 2012, 08:24 AM Eric_Shea You say the "front calipers have me stuck... Feb 7 2012, 08:38 AM BritCarJim hmmm. i didn't pull the calipers off of the ca... Feb 7 2012, 04:46 PM Eric_Shea :whistle: Feb 7 2012, 06:20 PM BritCarJim DING! DING! DING! i figured out the pr... Feb 7 2012, 10:38 PM stugray If you have not read the tech article at Eric... Feb 7 2012, 10:59 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 12:47 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.