 How far should I take it?, Removing paint layers and bondo |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| balljoint |
 Sep 24 2004, 02:08 PM
Post
#1
|
|
914 Wizard  Group: Members Posts: 10,000 Joined: 6-April 04 Member No.: 1,897 Region Association: None  |
How much should I take off? There are two layers of paint. On top is a crappy colour change to red, underneath the original orange, and in between there are bits of bondo filling in the odd hole. Once I am done with the chassis repairs (and replacing bondo with metal)I am going to POR what I can and then get her painted.
Whatever method I use, should I take it down to bare metal or just to the original primer and let the paint shop take it from there? What kind of surface should I put on the panels for the easiest paint job? This car will never be concours, I just want to fix it right and get the best finish job that I can. |
   |
 
|
Posts in this topic
balljoint How far should I take it? Sep 24 2004, 02:08 PM
balljoint To save on the likely first post.
:ttiwwp: Sep 24 2004, 02:09 PM davep I would say strip to bare metal. It is hard to pro... Sep 24 2004, 02:16 PM thesey914 Bare metal. The painter can use what paint he like... Sep 24 2004, 02:26 PM pman I'm thinking about doing the same to my LE. I ... Sep 24 2004, 03:55 PM lapuwali I would advise more caution. Doing a full-bare-me... Sep 24 2004, 04:28 PM markb Someone once told me to take it down to the origin... Sep 24 2004, 04:46 PM McMark What are your intentions for the car? Doing it ri... Sep 24 2004, 04:49 PM seanery my thought is:
if you're gonna invest a bunch... Sep 24 2004, 04:58 PM lapuwali QUOTE
Gint :agree:
If you're stripping the tub completel... Sep 24 2004, 05:21 PM balljoint I am doing all of the work myself. Up until the f... Sep 24 2004, 05:56 PM
Brett W Do your rough cutting with a DA or board file with... Sep 24 2004, 07:20 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th June 2024 - 03:25 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.