 914/6 signal switch issues/headlight issues, Car running and now some issues with the switches |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Mr.242 |
 Jun 23 2012, 09:11 AM
Post
#1
|
|
May your glass be smaller so it's always FULL!  Group: Members Posts: 1,079 Joined: 10-June 08 From: Seattle Member No.: 9,160 Region Association: Pacific Northwest  |
So I got the car running and doing the fine adjustments. First the headlight buckets were set at 180 degrees wrong. Off put the headlights up and on put them down. Got that fixed ASAP.
Then I came to the issue of that headlights on do not illuminate on low beam. I traced it to the high beam/flasher switch and it's sensitivity. If I wiggle it around I can get them to illuminate, but must hold it in the correct position. So obviously a contact issue. High Beams work great, just flip it forward and BAM there is light. Left turn position does not cancel, but flashes. So need to figure that as well. Before I dive into this; What am I looking at and what are my options? I've searched the prior posts and didn't find anything directly related to SIX assemblies. Thought maybe someone could help who's been here before. Thanks in advance. |
   |
 
|
Posts in this topic
Mr.242 914/6 signal switch issues/headlight issues Jun 23 2012, 09:11 AM
Mr.242 :bump:
No advice anywhere? Anyone have some pi... Jun 26 2012, 08:16 AM
rhodyguy tech tip 658 (AA)"if the turn signals do not ... Jun 26 2012, 10:45 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 12:43 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.