 Moving on to other things..., like the distributor |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| ThePaintedMan |
 Jul 17 2012, 10:30 AM
Post
#1
|
|
Advanced Member  Group: Members Posts: 3,886 Joined: 6-September 11 From: St. Petersburg, FL Member No.: 13,527 Region Association: South East States 
 |
Well, now that it seems I've gotten the carb, ignition and some of the other issues on my cart figured out, I'd like to install my vaccuum advance distributor. Its an 034 SVDA that I bought on Samba and the guy I bought it from had the condensor and diaphragm replaced. I had installed it before for a short time, but noticed that it was causing the car to run rough (before I entered the nightmare of dual carbs). It runs reasonably well with the 009 installed (as good as can be expected), so I suspect there must be something wrong with the SVDA. Possibly bad bearings or improperly assembled upon rebuild? Does anyone have access to a diagram or suggestions on what to check for wear?
|
   |
 
|
Posts in this topic
ThePaintedMan Moving on to other things... Jul 17 2012, 10:30 AM
mrbubblehead
Well, now that it seems I've gotten the carb,... Jul 17 2012, 04:39 PM ThePaintedMan Okay, it has a very small bit of side to side (lat... Jul 17 2012, 06:36 PM
mrbubblehead
Okay, it has a very small bit of side to side (la... Jul 17 2012, 06:44 PM ThePaintedMan
[quote name='ThePaintedMan' post='1710863' date='... Jul 17 2012, 06:49 PM mrbubblehead if you look on top of the distributor drive gear y... Jul 17 2012, 07:07 PM ThePaintedMan I'll try to pull it today to verify that it ha... Jul 18 2012, 07:16 AM ThePaintedMan Spring is there and looks properly seated. Hmmm. Jul 18 2012, 09:01 AM benalishhero stock camshaft? Jul 18 2012, 08:27 PM ThePaintedMan
stock camshaft?
Yep, stock. Which is a definite... Jul 19 2012, 07:34 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2024 - 07:08 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.