Parting out HIGHLY built 914. ERP, sheridan wide body, ect Options

[david ginsberg]

This race 914 has been parted out. Now what remains is an incredible chassis and suspension piece that would allow you to take your motor and transmission combo and immediately have the most bullet proof race 914 that you could build for over $120K.
Here are the items that remain and approximate new cost:

JRZ front double adjustable shocks and spindles with 930 hubs $3000

Fox adjustable rear shocks with 930 hubs $1700

Smart racing 935 front suspension $1900

New front steering rack with smart racing quick steering coupler $700

Momo Steering wheel and quick release adaptor $700

Sheridan Wide body kit rear Narrow body kit front $4000

Carbon fiber down force wing and custom up rights $1500

Custom front hood with aluminum down force air evac for front radiator or cooler Functional roof air induction $2000

Custom Rear deck lid with rear spoiler $1000

Fiske 18inch wheels Fronts 18 x 10.5; rear 18 x 13; with Dunlop slicks $5000

Lightweight doors $600

Lexan windshield $300

Adjustable front Lexan splitter $300

Custom two tone paint job. Quicksilver and Guards Red $2000

Turbo tie rods $150

Redesigned firewall to accommodate a dry sump system and is rear inspection plate from the interior $2500

Here are the incredible fabrications that have been competed on this car.

Tilton hanging pedals $200

Smart racing camber boxes for front suspension $5000

Fully integrated SCCA legal roll cage $3000

Reinforced boxed trailing arms $1500

Triangulated and reinforced pickup points for rear trailing arms $2000

Brembo GT Front and rear brake kit with extra pads $4500

Reinforced rear shock towers. Just this total alone is $43,280 how much are you willing to pay?????

This does not even begin to really get to the R & D cost that it took to develop this chassis. I.E. different combos that were tried that need to be retrofitted to insure reliability and proper racing optimized design.

I'm going to part this beast out, unless someone wants to step up and buy whole roller. In used parts alone- not counting the chassis, there is close to 20k.

I'd let the roller for 15k. If not, ill start parting it out in about a week.

For used parts cost, look at the posted price, and cut it in half, send me an offer

(IMG:http://www.914world.com/bbs2/uploads_offsite/www.914club.com-11122-1361313543.1.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i19.photobucket.com-11122-1361313543.2.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i19.photobucket.com-11122-1361313544.3.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i19.photobucket.com-11122-1361313544.4.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i19.photobucket.com-11122-1361313544.5.jpg)