 EPDM Caliper 1/2 Seals, Square Cut Caliper 1/2 Seals |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Eric_Shea |
 Mar 20 2013, 03:32 PM
Post
#1
|
|
PMB Performance  Group: Admin Posts: 19,304 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains   |
Everyone's been asking for the real deal seals and, here they are.
You will need 4 of these to do a pair of solid rotor (914 front and rear) calipers and 8 of these to do a pair of vented rotor calipers (914-6 fronts with spacers) These are the proper EPDM rubber seals to use when rebuilding your calipers. These are the real deal gang... the square cut factory seals you've been hunting all over for. These seals are rated at over 10,000 PSI. Now you can sleep at night knowing that at least the seals are correct in your rebuild! Of course, these come in our kits but, if you didn't figger that out in advance and you made a booboo in your purchasing decision, you can always visit us at the friendly link below and we'll be happy to bring your seal kits up to our standards. (IMG:style_emoticons/default/biggrin.gif) http://www.pmbperformance.com/catalog/item...552/9694936.htm  |
   |
 
|
Posts in this topic
  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2026 - 05:36 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.