 914/4 steering rack play, Anyone has bushing inner and outer dimensions? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| larss |
 May 2 2013, 04:22 AM
Post
#1
|
|
Member  Group: Members Posts: 428 Joined: 10-September 09 From: Sweden Member No.: 10,787 Region Association: Scandinavia  |
Found that the rack has a play in its outer right end, about 1/16" sideways and up and down, not in/out, guess the bearing sleeves has to be changed.
What more should be done at the same time? /Lars S |
   |
 
|
Posts in this topic
larss 914/4 steering rack play May 2 2013, 04:22 AM
914Sixer Try and find a good used one. Rebuilt ones are ... May 2 2013, 08:19 AM larss Thanks!
Would a 911 rack from the same time pe... May 2 2013, 08:46 AM
SirAndy Would a 911 rack from the same time period fit?
It... May 2 2013, 11:38 AM r_towle try used first.
The replacement parts are two bus... May 2 2013, 10:02 AM underdog
Found that the rack has a play in its outer right... May 2 2013, 11:52 AM SirAndy AA sells steering column wheel/ball bearing.
His p... May 2 2013, 01:53 PM FourBlades Just making sure here, but is the play in the rack... May 2 2013, 03:00 PM larss Thanks everyone for great help!
I have checke... May 2 2013, 10:33 PM porschefile2010 I had to get my steering rack serviced when I brou... May 2 2013, 11:48 PM larss I have managed to get the bushing out of the housi... May 3 2013, 02:02 AM r_towle the bushing is bronze.
You need to pull the rack ... May 3 2013, 07:32 AM r_towle Maybe someone with access to the PET could post an... May 3 2013, 07:37 AM larss Many thanks Rich, this made things clear!
I ha... May 3 2013, 08:39 AM r_towle
Many thanks Rich, this made things clear!
I h... May 3 2013, 01:39 PM larss Took a closer look at the bushing today, removed t... May 5 2013, 06:35 AM r_towle Forgot about this thread.
From what I remember, th... May 7 2013, 08:28 PM larss Thanks again Rich for this wery useful information... May 7 2013, 10:19 PM larss By the way, does anyone happens to have the precis... May 8 2013, 08:51 AM r_towle
By the way, does anyone happens to have the preci... May 8 2013, 12:27 PM larss
Again, we determined at the time that every rack... May 8 2013, 11:41 PM toolguy here is the only shot I have of the bushings when ... May 8 2013, 11:17 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 12:36 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.