 H4 headlight relay question |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| SKL1 |
 Jul 3 2014, 01:22 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,685 Joined: 19-February 11 From: north Scottsdale Member No.: 12,732 Region Association: Upper MidWest 
 |
Putting in new H4 headlights with the 100W high beam and utilizing the "relay" to protect the OEM wiring.
Using the relay and new lights from Pelican and have checked and rechecked my wiring several times. Fused power from battery to #30. #85 to ground. #87 to high beam terminal of each light, #86 to old headlight wiring on one side, and taped off the other as recommended. I have 12V into relay when high beams are on, and good 12V from battery, but neither high beam works thru the system, though low beams work. Fuses all good- new JWest fuse panel. Bulbs new and work fine when bench tested. Any ideas???? Have 2 new relays from Pelican and have tried both... ('73 2.0) |
   |
 
|
Posts in this topic
SKL1 H4 headlight relay question Jul 3 2014, 01:22 PM
Cap'n Krusty You need one relay for the low beam, one for the h... Jul 3 2014, 01:32 PM ClayPerrine :agree:
For one side you will need two relays, ... Jul 3 2014, 01:47 PM Luke M I found this drawing awhile back.
Hope it helps. Jul 3 2014, 02:31 PM ClayPerrine That is a good diagram, with one flaw.
The origin... Jul 3 2014, 02:47 PM SKL1 great suggestions guys!!
another project ... Jul 3 2014, 02:56 PM Dave_Darling You don't have to have relays for the low beam... Jul 3 2014, 02:57 PM Drums66 .....Low watt H-4's,,,,no relay's(I have n... Jul 4 2014, 01:24 PM
SKL1 This car will spend its life in AZ- it is VERY da... Jul 4 2014, 02:40 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 04:53 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.