 how do i adjust parking brake |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| rosenfe |
 Sep 17 2014, 07:40 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 549 Joined: 14-October 13 From: northern california Member No.: 16,512 Region Association: None  |
on my 73,i recently installed rebuilt rear calipers,set venting.now hand brake lever will not fully engage parking brake,it ratches too high,too much slack..im assumong previous calipers were stuck and gave very little motion to hand brake lever.i undid 2 adjusting nuts under neath at cable,but not sure how to adjust slack.do i need to undo cable from caliper,then adjust?what direction do i turn cable? |
   |
 
|
Posts in this topic
rosenfe how do i adjust parking brake Sep 17 2014, 07:40 PM
colingreene Where the cables enter the tubes on the body under... Sep 18 2014, 12:50 AM bdstone914
on my 73,i recently installed rebuilt rear calipe... Sep 18 2014, 06:12 AM
rosenfe
on my 73,i recently installed rebuilt rear calip... Sep 18 2014, 09:13 AM John Jentz
[quote name='bdstone914' post='2087603' date='Sep... Sep 18 2014, 09:33 AM rosenfe
[quote name='bdstone914' post='2087603' date='Se... Sep 18 2014, 11:06 AM rhodyguy how many "clicks" do you hear when tryin... Sep 18 2014, 12:01 PM rosenfe definitely too many clicks,handle comes up high an... Sep 18 2014, 12:53 PM mskala Less likely problem, but last time I assembled cab... Sep 18 2014, 01:13 PM rosenfe
Less likely problem, but last time I assembled ca... Sep 18 2014, 01:16 PM rhodyguy pretty sure your venting clearance is too great. d... Sep 18 2014, 02:26 PM jt914-6 Factory Manual.....vent clearance 0.2 mm or 0.079 ... Sep 18 2014, 03:09 PM Rufus Stumbled across this older thread while researchin... Oct 3 2021, 06:26 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 23rd May 2024 - 04:31 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.