 Rear Brake Lockup Help, Help |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| spaceshuttle |
 Nov 15 2014, 10:42 AM
Post
#1
|
|
Member  Group: Members Posts: 73 Joined: 25-November 06 From: SouthCarolina Member No.: 7,258  |
I am running larger 4 piston Outlaw (read Willwood) calipers on the front of my v6 track car, with 911 M calipers on the rear. I installed a brake bias adjuster knob initially but my rears lockup under heavy braking no matter the adjustment. Switched to a Tilton bias adjustment with the notched rod with multiple positions and still no change. I cannot tell that there is much difference in the pressure to the rears. They will lockup no matter the position under heavy braking. They are not sticking. Not sure which direction to go from here. I am running Hawk blues front and rear. Perhaps a less aggressive rear pad? And yes the factory proportioning valve was removed.
thanks for any help guys. LC |
   |
 
|
Posts in this topic
spaceshuttle Rear Brake Lockup Help Nov 15 2014, 10:42 AM
Randal
I am running larger 4 piston Outlaw (read Willwoo... Nov 15 2014, 01:28 PM
spaceshuttle
I am running larger 4 piston Outlaw (read Willwo... Nov 15 2014, 03:25 PM Randal
[quote name='Randal' post='2110810' date='Nov 15 ... Nov 15 2014, 04:33 PM stownsen914 Strange that they keep locking up even with the bi... Nov 19 2014, 09:58 AM Randal
Strange that they keep locking up even with the b... Nov 19 2014, 02:34 PM stownsen914 I wasn't clear in my questions! I meant to... Nov 19 2014, 02:44 PM ThePaintedMan
I wasn't clear in my questions! I meant t... Nov 19 2014, 07:27 PM wndsrfr
I am running larger 4 piston Outlaw (read Willwoo... Nov 19 2014, 09:01 PM spaceshuttle
I am running larger 4 piston Outlaw (read Willwo... Nov 19 2014, 10:07 PM campbellcj Definitely odd. I have Carrera A front and M back ... Nov 25 2014, 11:37 PM J P Stein Tough to go wrong with the A/M set up. Porsche eng... Nov 27 2014, 09:58 AM brant I don't think putting inferior parts on as a b... Nov 27 2014, 10:08 AM spaceshuttle I think I have identified the problem and it seems... Nov 27 2014, 10:48 AM jd74914 Before doing anything I would corner balance with ... Nov 28 2014, 09:58 PM Randal
Before doing anything I would corner balance with... Nov 28 2014, 10:52 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 09:38 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.