 Front end rattle, Is something worn out? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| malcolm2 |
 Dec 8 2014, 07:03 PM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,747 Joined: 31-May 11 From: Nashville Member No.: 13,139 Region Association: South East States 
 |
If needed I'll shoot a little video. But here is what I found. The upper section is holding firm. I can grab the lower section just below the upper and move it, significantly. It looks to be moving inside the upper section. The top nut is tight (viewed in the front trunk), I don't see any movement there.
This is a shot of the passenger side. it is moving the most. The drivers side only moves slightly. Not enough to notice the rotor etc... moving like on this side. Of course it is the bumpy roads, turning in driveways, etc... that make the noises as I am driving. Say the word and I'll shoot a video. You can hear the clanking.  |
   |
 
|
Posts in this topic
malcolm2 Front end rattle Dec 8 2014, 07:03 PM
SirAndy The top part is just a dust cover and not really p... Dec 8 2014, 07:08 PM SirAndy Oh, and only unbolt the large top shock nut!
... Dec 8 2014, 07:11 PM
malcolm2
Oh, and only unbolt the large top shock nut!
... Dec 8 2014, 07:23 PM bdstone914
Oh, and only unbolt the large top shock nut... Dec 8 2014, 07:26 PM wndsnd The nut inside the strut that Andy is talking abou... Dec 8 2014, 07:21 PM malcolm2
The nut inside the strut that Andy is talking abo... Dec 8 2014, 07:25 PM r_towle It's easier if you remove the anti sway bar dr... Dec 8 2014, 08:09 PM malcolm2
It's easier if you remove the anti sway bar d... Dec 8 2014, 09:29 PM malcolm2 Another successful repair. I am sure I would have... Dec 8 2014, 08:12 PM r_towle
I first broke the 200HP mark on pump gas in 1996... Dec 8 2014, 09:42 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 11:18 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.