 Engine start up, Problem 3: Weak Starter |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| OU8AVW |
 Dec 17 2014, 11:44 AM
Post
#1
|
|
Yacht Rigger  Group: Members Posts: 1,803 Joined: 1-October 08 From: Granbury, TX Member No.: 9,601 Region Association: Southwest Region  |
I'm working through starting my freshly rebuilt 2056. It has the original D-Jet and is a 1975 motor. At first I had no fuel pump, I fixed that.
Now there is no spark from the coil. I traced the lead from #8 on the fuse box to the relay board then out the relay board. I have 12.4v at the coil positive but no spark. I'm testing it with a light-type tester. No bueno.... It is a Bosch coil, i believe it is a "blue" coil. I read here that there should be 1.5 ohms resistance between the two poles on the coil with everything dissconnected. This one tests at 7.4 ohms. A spare coil I had had similar results with no spark at crank and 4.6 ohms resistance. I assume i need a new coil...... Right? |
   |
 
|
Posts in this topic
OU8AVW Engine start up Dec 17 2014, 11:44 AM
stugray Here is a quick test:
Unhook the lead from the co... Dec 17 2014, 12:08 PM Cap'n Krusty "New coil"? Hardly EVER. Look at the w... Dec 17 2014, 12:36 PM OU8AVW I will test tonight and report back to the collect... Dec 17 2014, 03:06 PM OU8AVW Installed new points. Now I have spark. Thanks for... Dec 18 2014, 08:51 AM Cap'n Krusty First, make ABSOLUTELY sure you have the fuel ring... Dec 18 2014, 09:22 AM Dave_Darling If you don't want to muck with the key on/off ... Dec 18 2014, 11:02 AM Jon H. Doesn't the fuel pump also need to be lower th... Dec 19 2014, 05:40 AM OU8AVW Got spark. It was the points
Fuel pump seems to be... Dec 19 2014, 01:26 PM stugray
I didnt catch the new rebuild part.
So you have... Dec 19 2014, 01:51 PM
OU8AVW
I didnt catch the new rebuild part.
So you hav... Dec 19 2014, 03:01 PM stugray Here a cut & paste from my other posts regardi... Dec 19 2014, 03:27 PM OU8AVW Here you go stu....
http://www.914world.com/bbs2/i... Dec 19 2014, 05:43 PM OU8AVW I realized that last thread didn't have my fin... Dec 19 2014, 05:48 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 22nd May 2024 - 11:45 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.