 Axle/CV Joint Question, Can I use the axle |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jrrhdmust |
 Mar 24 2015, 11:34 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,402 Joined: 12-October 11 From: Alabama Member No.: 13,668 Region Association: None  |
So my CV joint have been sitting around for about 2 years uncovered. I new I was going to have to regrease the end that connects to the transmission. I recently pulled the CV joint apart, and cleaned it.
I then pulled the axle part that connects to the wheel, and I had this thought... "Why can't I bolt this (the part of the drive shaft that bolts to the hub) on the car, and regrease the CV joints, and just cover the CV joints and put the axle on the shelf"? This would do two things, I could remount the tires and have a roller, while not have the axles flop around until I am ready to put the trans and engine back in. Sooo is this ok? Seems ok to me, I would mark which one can off which axle so I could reinstall. |
   |
 
|
Posts in this topic
jrrhdmust Axle/CV Joint Question Mar 24 2015, 11:34 AM
OU8AVW Some folks buy an extra set of axles.....
I made b... Mar 24 2015, 11:44 AM pcar916 You're talking about CV removal at the stub-ax... Mar 24 2015, 02:47 PM
jrrhdmust
You're talking about CV removal at the stub-a... Mar 25 2015, 07:04 AM The Cabinetmaker Your on the right track reinstalling the stub axle... Mar 25 2015, 07:20 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 13th June 2024 - 07:35 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.