 Testing relays at home, no 914 around |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| VaccaRabite |
 Apr 14 2015, 10:26 AM
Post
#1
|
|
En Garde!  Group: Admin Posts: 13,456 Joined: 15-December 03 From: Dallastown, PA Member No.: 1,435 Region Association: MidAtlantic Region  |
I have an old bag of used round relays.
I dont have a 914 handy to plug them into the headlight riser (my usual test). How can I test them with a multimeter and a small 12 volt battery? I guess I just need the pin out for these things and I should be able to test them pretty easy. |
   |
 
|
Posts in this topic
Vacca Rabite Testing relays at home Apr 14 2015, 10:26 AM
r_towle Power, ground and a trigger should do it.
Using a... Apr 14 2015, 10:34 AM okieflyr A 9v battery MIGHT give enough juice to operate it... Apr 14 2015, 10:35 AM type47 relay board diagram from workshop manual should he... Apr 14 2015, 11:35 AM era vulgaris Pins 86 and 85 are the relay coil. One gets groun... Apr 14 2015, 11:42 AM stugray Put your DMM on Ohms and connect it across pins 30... Apr 14 2015, 12:45 PM Tom I have tried the 9v battery and it will not power ... Apr 14 2015, 02:58 PM r_towle Stick your tongue across the two prongs when you c... Apr 14 2015, 07:12 PM rhodyguy mail your box of relays to a buddy with a running ... Apr 15 2015, 12:27 PM malcolm2 i use the batt from my drill. it is 12v. got one... Apr 15 2015, 12:39 PM
stugray
i use the batt from my drill. it is 12v. got on... Apr 15 2015, 01:56 PM GeorgeRud Here's a schematic of the relay:
Apr 15 2015, 12:46 PM Vacca Rabite I actually have a 12 volt battery. :-)
But I chea... Apr 16 2015, 02:34 PM McMark Here's a more specific diagram. Apr 16 2015, 02:52 PM barefoot While I was going thru circuits individually, I ma... Apr 16 2015, 04:29 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 01:26 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.