 Another idle question, L jet 1911 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| malcolm2 |
 Aug 7 2015, 10:22 PM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,747 Joined: 31-May 11 From: Nashville Member No.: 13,139 Region Association: South East States 
 |
I just cruised 300 miles on I40 going to NC. I got to the top of the exit ramp and she idled to zero. I drove about 3 miles thru town using the big toe to brake and the little toe to keep the revs at about 1500. By the time i parked she was idling as normal.
I have to do the same thing every morning til she warms up. Is that a vacuum leak? Heading another 2 hours in the AM. Is there a quick fix i can do to get thru the weekend? |
   |
 
|
Posts in this topic
malcolm2 Another idle question Aug 7 2015, 10:22 PM
timothy_nd28 Check the CHT sensor. Aug 7 2015, 10:33 PM
malcolm2
Check the CHT sensor.
Thanks Tim,
To save me f... Aug 8 2015, 05:47 AM timothy_nd28 Sure, unplug the connector at the CHT sensor and m... Aug 8 2015, 04:26 PM malcolm2
Sure, unplug the connector at the CHT sensor and ... Aug 8 2015, 09:07 PM pete000 I am fighting a L-Jet low idle when cold. Car just... Aug 8 2015, 06:07 PM timothy_nd28 While you are at it, check the resistance from pin... Aug 8 2015, 09:18 PM malcolm2 As luck would have it, the damn cheap voltmeter I ... Aug 9 2015, 08:52 AM malcolm2 OK Tim, I checked the resistance with the engine c... Aug 10 2015, 07:32 PM timothy_nd28 I graphed your numbers against what's in the m... Aug 11 2015, 10:43 AM malcolm2 Oops. Forgot that suggestion. I'll get that to... Aug 11 2015, 11:12 AM malcolm2 I got you some cold readings. The meter kept gping... Aug 11 2015, 08:15 PM timothy_nd28 It calls for 2000 ohms at room temperature which w... Aug 11 2015, 09:02 PM malcolm2
It calls for 2000 ohms at room temperature which ... Aug 12 2015, 07:47 AM malcolm2 I have not moved the adjustment screw since we tin... Aug 11 2015, 10:11 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th June 2024 - 02:00 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.