 914-6 Weber 40IDA adjustment problems |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| hars914 |
 Mar 12 2005, 08:23 PM
Post
#1
|
|
Member  Group: Members Posts: 114 Joined: 6-January 03 Member No.: 94  |
I just rebuilt my carbs for my six. I got the car warmed up and started tuning them.
First when I turned the mixture screws on one of the carbs the idle did not change unless I just about turned them all the way in. The other carb did not change much at all when I turned the in or out. When I tried to adjust the air correction screws on both carbs I could not get them to all read the same on the sync tool. I was geeting a lot of backfiring thru thru the carbs. What is my problem here??????? |
   |
 
|
Posts in this topic
hars914 914-6 Weber 40IDA adjustment problems Mar 12 2005, 08:23 PM
MecGen Hey man
Put the "6cyl" in the title heading and yo... Mar 12 2005, 08:26 PM Carl It could be a variety of things. Since you rebuil... Mar 12 2005, 10:11 PM john rogers You need to make sure the fuel pressure is about 3... Mar 12 2005, 10:18 PM J P Stein It sounds as if they are reacting just about as th... Mar 13 2005, 01:15 AM MecGen Guru Help...score
http://www.914wo... Mar 13 2005, 07:01 AM hars914 Thanks for the help.I will check for vacum leaks a... Mar 14 2005, 06:26 AM 9146986 Here's a copy of my post from 9/22/04
Assumpt... Mar 14 2005, 08:01 AM Eric_Shea I just did this and found that "much" of what you... Mar 14 2005, 09:01 AM
Thorshammer All of these are good points, however I would like... Mar 14 2005, 10:57 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th June 2024 - 02:27 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.