 Pushrod, lifter, valve, etc. PROBLEM., Daily Driver emergency! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| ripper911 |
  May 9 2016, 06:18 PM
Post
#1
|
|
corde pulsum tangite  Group: Members Posts: 2,920 Joined: 25-April 10 From: Powder Springs, GA Member No.: 11,654 Region Association: South East States  |
I went to perform a valve adjustment and the exhaust valve on #4 wouldn't tighten. I got frustrated and called in a travelling 914 mechanic.
The screw was binding in the rocker, but he got it tightened enough to try to adjust. It wasn't moving while turning the engine. I was left with instructions to pull the rockers and check the pushrod as it might be bent. I pulled the pushed out, and it looks pretty straight to me, so he said to pull the lifter out with a magnet and inspect it. This is where I'm stuck. I was having trouble with my extendable magnet extending and collapsing while trying to pull the lifter out. I bought some new magnets, but I'm still not having any luck. The mechanic said that it takes some finessing to get out. Is there a trick to it? What makes it worse is that I have been using one of my boss's cars in the meantime, but they're selling the business (closing on sale Wednesday) so I need to give the car back. I'll get the mechanic back over here soon, but going on my knowledge of the car, if the pushrod isn't bent, and if the lifter turns out to be OK, then it won't be something I can fix over the weekend. Help... (IMG:style_emoticons/default/unsure.gif) |
   |
 
|
Posts in this topic
ripper911 Pushrod, lifter, valve, etc. PROBLEM. May 9 2016, 06:18 PM
Dave_Darling No trick to it; just get the magnet down to the li... May 9 2016, 07:57 PM ripper911 The adjustment screw got buggered up. I'll ha... May 9 2016, 08:43 PM r_towle They don't come out that easy....sometimes a r... May 9 2016, 08:55 PM ripper911 I'm supposed to pull the lifter to inspect it ... May 9 2016, 09:06 PM r_towle Put it back together and don't worry about the... May 9 2016, 09:52 PM
ripper911
IF the camshaft was wearing out, you would have ... May 10 2016, 05:38 AM Jake Raby
IF the camshaft was wearing out, you would have... May 10 2016, 08:11 AM r_towle
[quote name='ripper911' post='2342524' date='May ... May 10 2016, 01:46 PM ripper911
You gotta tell the whole story up front dude.
R... May 10 2016, 02:07 PM Jake Raby The lifter won't slide through the bore, for r... May 9 2016, 10:02 PM ripper911
The lifter won't slide through the bore, for ... May 10 2016, 05:11 AM stugray Just curious:
You are not trying to pull the lift... May 9 2016, 10:10 PM rjames
Just curious:
You are not trying to pull the lif... May 10 2016, 12:27 AM ripper911
Just curious:
You are not trying to pull the li... May 10 2016, 05:03 AM The Cabinetmaker Stu said it right. You must pull the pushrod tube ... May 10 2016, 06:01 AM ripper911
Stu said it right. You must pull the pushrod tube... May 10 2016, 06:11 AM ripper911 So... Let's say that I NEED to have a car runn... May 10 2016, 01:35 PM stugray
So... Let's say that I NEED to have a car run... May 10 2016, 01:40 PM ripper911
So... Let's say that I NEED to have a car ru... May 10 2016, 01:41 PM r_towle Used 1.8 head.
Pull motor, swap head....a weekend ... May 10 2016, 01:52 PM r_towle You don't know what is wrong....
Might be che... May 10 2016, 02:08 PM ripper911 Slight progress, but still rampant frustration.
I... May 11 2016, 10:51 AM stugray Another thing you can check now: Since the rocker ... May 11 2016, 10:56 AM veekry9 Tools in the box,a steel rule and an air adapter.
... May 11 2016, 11:06 AM ripper911 I should just toss my 911 engine in it. May 11 2016, 11:13 AM Dave_Darling
I should just toss my 911 engine in it.
Yeah, b... May 11 2016, 04:56 PM veekry9
Yes you should,then install an LS7 into the 911... May 11 2016, 12:04 PM ripper911
Yes you should,then install an LS7 into the 91... May 11 2016, 06:23 PM ripper911 Luckily I'm getting a deal on a VW kit car tha... May 11 2016, 06:19 PM ripper911
Luckily I'm getting a deal on a VW kit car th... May 11 2016, 06:31 PM veekry9 To the moon,Alice.
A glass SS100,in a mod shade,ma... May 11 2016, 06:33 PM ripper911 http://www.914world.com/bbs2/uploads_offsite/i921.... May 11 2016, 06:36 PM ripper911 I'll fix the 914 eventually, I always do.
:dr... May 11 2016, 08:02 PM r_towle Looks like you.......might fit the skeleton better... May 11 2016, 08:08 PM ripper911
Looks like you.......might fit the skeleton bette... May 11 2016, 08:10 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th June 2024 - 07:20 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.