 SOT... SBC V8 Crankshafts, Looking at NASCAR Stuff... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| dakotaewing |
 Apr 7 2005, 09:28 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,160 Joined: 8-July 03 From: DeSoto, Tx Member No.: 897 Region Association: Southwest Region 
 |
OK, As some of you may be aware, I have been looking for a DZ302 crankshaft for quite a while.... It is a 3.00 short stroke crank(HIGH REVS)
The people who are buying these cranks are paying a premium, to build #'s correct motors for the 69 Z28 crowd... Well, last night I stumbled upon some NasCar 3.26 cranks. Mind you, the stroke is very close to a 327, but the guys that have been using these seem to be using flat top pistons, and 6.20 rods, instead of 5.7, and high compression pistons... Does anybody on the board know anything about these cranks and motors...? Jimmy? BigKat? PS I am looking to build a short stroke, small bore, high RPM motor... Not a torque monster... (IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif) Thanks - Thom |
   |
 
|
Posts in this topic
dakotaewing SOT... SBC V8 Crankshafts Apr 7 2005, 09:28 PM
LvSteveH With all the SBC (small block chevy) stuff out the... Apr 7 2005, 09:51 PM dakotaewing Steve...
The DZ 302 1178 crank is forged....
If y... Apr 7 2005, 10:26 PM BatFromHell Thom:
You may want to try in Canada here. There i... Apr 7 2005, 11:44 PM LvSteveH You might check into Lunati, part #AD111DN has a 3... Apr 8 2005, 01:52 AM Verruckt Crower makes cranks too if i remember right. Also,... Apr 8 2005, 06:04 AM dakotaewing Thanks for the replys Guys-
Bat : High performanc... Apr 8 2005, 08:49 AM nickg one thing to consider carefully on the nascar stuf... Apr 8 2005, 11:02 AM Brett W The 400s don't have an overheating problem if ... Apr 8 2005, 11:03 AM
BatFromHell Thom:
I will email you pages from their catalog.
T... Apr 8 2005, 01:19 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 01:26 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.