 MSD 6A with Pertronix, Hook up question |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Sparky |
 Apr 15 2005, 10:08 AM
Post
#1
|
|
Mahna Mahna!  Group: Members Posts: 1,134 Joined: 21-June 03 From: Spencer, MA Member No.: 847  |
So I'm hooking up the MSD I had in my 944, this is a known good unit sent it to MSD and had it tested. Here are my questions:
I'm using a Pertronix Ignitor not points: When hooking up based on the docs from MSD I've connected the black(ground) from the Pertronix to the White wire ( points trigger) on the MSD. No spark. Tested the MSD, coil wire held 1/4" from ground and white wire tapped to ground pull white wire away nice sparkage!! Ok based on MSD notes this is a valid test and proves coil s producing spark. Am I using the wrong wire for the Pertronix? What do I do with the red wire from the Pertronix? Damn I miss the one wire hook up from the 944... My best, Mike D. (IMG:http://www.914world.com/bbs2/html/emoticons/beerchug.gif) |
   |
 
|
Posts in this topic
Sparky MSD 6A with Pertronix Apr 15 2005, 10:08 AM
Sparky A little help please... Anyone? Hello? I've go... Apr 15 2005, 10:26 AM jkeyzer That sounds right to me.
Did you connect the red ... Apr 15 2005, 10:30 AM Sparky Ran fine with just the Pertronix. I forgot to hook... Apr 15 2005, 10:43 AM ArtechnikA Apr 15 2005, 10:59 AM
Sparky Rich - Need a hug?
I knew I was pushing it a lit... Apr 15 2005, 11:22 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th June 2024 - 12:17 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.