 Problem starting- carb, distributor? Video included |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tornik550 |
 Nov 27 2016, 11:09 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,248 Joined: 29-January 07 From: Ohio Member No.: 7,486 Region Association: None  |
On my 2.7 /6 I am having an issue starting my engine. It makes a scary noise when cranking the starter. The engine does start after a few tries.
I have dual Weber IDA 3c that have been completely rebuilt. The engine runs fine after starting however a bit on the rich side. I have a 123ignition distributor and I am trying to figure out the correct advance curve. I know that if the ignition is too advanced you can get an issue like this. I have tried setting the advance to 2 degrees at 500rpm and 10 at 1000rpm- the sound is worse. The video is when I had the distributor set at 2 at 200rpm and 6 at 1000 which I really doubt is too advanced. Also- it was pretty cold outside- about 25f. https://youtu.be/gBjkq23ZDrQ Also- what kind of muffler do I have? I normally use an MK muffler but I needed something fairly quite while I am getting my car dialed in. I have been irritating my neighbors quite a bit. |
   |
 
|
Posts in this topic
tornik550 Problem starting- carb, distributor? Video included Nov 27 2016, 11:09 AM
jmill It think you need to advance your timing. That noi... Nov 27 2016, 12:35 PM
tornik550
It think you need to advance your timing. That no... Nov 28 2016, 12:00 PM McMark Did you zero calibrate the distributor? Which is ... Nov 28 2016, 01:29 PM jmill So your timing is set at 6 degrees after top dead ... Nov 28 2016, 03:57 PM tornik550 Sorry, I was not clear. It is 6 degrees before t... Nov 28 2016, 04:18 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 12:33 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.