 camber settings, What are you guys running? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914dave |
 May 25 2017, 10:47 AM
Post
#1
|
|
914 Addict  Group: Members Posts: 724 Joined: 19-October 03 From: Willow Grove Pa. Member No.: 1,262 Region Association: North East States 
 |
Won't be long til we're off to alignment and corner balance. The car is mostly street use and probably a monthly autocross. 21mm bars up front and 180# adjustable coilovers in the rear. 23mm front sway bar and the front spindles are raised 19mm. Torque bias limited slip and a stock rear sway bar.
Are you guys running stock settings? I don't mind a little more aggressive but it's not an all out competition car. I'll sacrifice a little more tire wear for performance. What have you guys run that works? |
   |
 
|
Posts in this topic
914dave camber settings May 25 2017, 10:47 AM
Dave_Darling A starting point:
-1.5 camber rear.
-1.0 camber f... May 25 2017, 02:26 PM okieflyr Dave,
Do you have someone in mind to do the alignm... May 25 2017, 04:24 PM
914dave
Dave,
Do you have someone in mind to do the align... May 25 2017, 04:27 PM okieflyr You might want to talk to Bill Sherwood @ CSE in O... May 25 2017, 04:44 PM 914dave I'm familiar with Bill, Dion has actually used... May 26 2017, 04:15 AM Racer Chris I don't like to use more than 3/4 degree negat... May 26 2017, 04:40 AM 914dave
I don't like to use more than 3/4 degree nega... May 26 2017, 06:10 AM HalfMoon I've recently found a Porsche shop here in the... Jun 26 2017, 10:55 AM 914dave
I've recently found a Porsche shop here in th... Jun 26 2017, 11:24 AM Racer Chris
... Chris, please chim in!
I would follow t... Jun 26 2017, 11:55 AM HalfMoon
... Chris, please chim in!
I would follow ... Jun 26 2017, 01:27 PM LowBridge
... Chris, please chim in!
I would follow ... Jun 28 2017, 06:26 AM HalfMoon
I've recently found a Porsche shop here in th... Jun 29 2017, 03:17 PM Dave_Darling For a track car, the usual rule of thumb is ... Jun 26 2017, 05:35 PM HalfMoon
For a track car, the usual rule of thumb is ... Jun 26 2017, 07:28 PM plays with cars For me the cars have always been driven on the str... Jun 27 2017, 11:43 PM Racer Chris
...
Depending on how many miles you'll be put... Jun 28 2017, 07:08 AM larryM
For me the cars have always been driven on the st... Jun 28 2017, 03:20 PM Mark Henry What do you guys think about doing your own alignm... Jun 28 2017, 07:29 AM LowBridge
What do you guys think about doing your own align... Jun 28 2017, 07:32 AM Mark Henry
with even simply tools this is very easy to do..... Jun 28 2017, 07:47 AM Dave_Darling
Yep, I was thinking about that because my floor i... Jun 28 2017, 12:32 PM Mark Henry
[quote name='Mark Henry' post='2501101' date='Jun... Jun 29 2017, 06:15 AM 914_teener
What do you guys think about doing your own align... Jun 28 2017, 07:50 AM Dave_Darling I think you meant front toe-out to improve turn-in... Jun 29 2017, 12:21 AM jmitro
I think you meant front toe-out to improve turn-i... Jun 29 2017, 06:00 AM Dave_Darling I have heard from folks on the Bird Board that the... Jun 29 2017, 12:10 PM Mark Henry
I have heard from folks on the Bird Board that th... Jun 29 2017, 03:26 PM Travis Neff There's someone selling a real set of corner w... Jun 29 2017, 03:34 PM larryM a chart in Porsche's 1972 Info for Sports Purp... Jul 2 2017, 04:57 PM HalfMoon That above compilation was/is quite helpful inform... Jul 2 2017, 08:01 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 31st July 2025 - 07:44 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.