 swapping to 911 control arm, because of these torsion bars |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Jetsetsurfshop |
 Nov 1 2017, 07:03 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 814 Joined: 7-April 11 From: Marco Island Florida Member No.: 12,907 Region Association: South East States  |
I picked these up second hand and wondered if a stock 911 would use torsion bars this big. I assume that there Porsche parts because of the part numbers stamped on the ends.
I also noticed that one was stamped for the right side, the other isn't stamped. Should I assume that the unnamed one is the left? The car is a dedicated track car and I've been using the stock 914 bars. Time to beef up the suspension. (IMG:style_emoticons/default/driving.gif) Attached image(s) 
|
   |
 
|
Posts in this topic
Jetsetsurfshop swapping to 911 control arm Nov 1 2017, 07:03 PM
Racer I ran 23mm front torsion bars on my track duty 911... Nov 1 2017, 07:07 PM
Jetsetsurfshop
I ran 23mm front torsion bars on my track duty 91... Nov 2 2017, 06:49 AM worn Not sure. When I did the 5 lug conversion for the... Nov 1 2017, 07:11 PM SKL1 I do know there are more splines on the 911 torsio... Nov 1 2017, 07:17 PM mepstein They will be way stiffer than a stock bar and like... Nov 1 2017, 07:38 PM Jetsetsurfshop I have 911 A arms. Just cleaned them up today. Nee... Nov 1 2017, 07:54 PM Steve Both the 914 and 911 control arms support 21,22 an... Nov 1 2017, 08:08 PM Steve The automotion catalog and an old Porsche magazine... Nov 2 2017, 07:31 AM Steve Here’s the Automotion chart from an old catalog
Nov 2 2017, 08:30 AM Steve Brumos Recipe
Nov 2 2017, 08:51 AM Jetsetsurfshop Damn Steve. Thanks for that info. :beer2: Nov 2 2017, 10:15 AM Racer nice articles!
Not sure where you want to ... Nov 2 2017, 03:31 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 31st May 2024 - 07:22 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.