 Starter motor, What do I need |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| DavidSweden |
 Dec 14 2017, 12:00 PM
Post
#1
|
|
Member  Group: Members Posts: 479 Joined: 8-June 14 From: Sweden Member No.: 17,452 Region Association: Scandinavia  |
I have a 2,2T Motor #6110444 I am going to install it into a 914. I believe that I need an early flywheel so it will mate with the 914 clutch & gearbox. Can anyone tell me what type of starter motor I need so it will fit on the 914 box and mate with the flywheel
Thanks |
   |
 
|
Posts in this topic
DavidSweden Starter motor Dec 14 2017, 12:00 PM
porschetub
I have a 2,2T Motor #6110444 I am going to instal... Dec 14 2017, 12:07 PM GeorgeRud The stock Bosch starter will work fine, but consid... Dec 14 2017, 04:20 PM
DavidSweden
The stock Bosch starter will work fine, but consi... Dec 15 2017, 11:06 AM Spoke
[quote name='GeorgeRud' post='2557760' date='Dec ... Dec 15 2017, 10:04 PM DavidSweden
In the 914, the power to energize the bendix goe... Dec 16 2017, 05:40 AM wndsrfr
I have a 2,2T Motor #6110444 I am going to instal... Dec 14 2017, 07:33 PM Retroracer David - I have the same engine / tranny setup; the... Dec 15 2017, 02:23 PM DavidSweden
David - I have the same engine / tranny setup; th... Dec 15 2017, 02:36 PM Retroracer
[quote name='Retroracer' post='2558042' date='Dec... Dec 16 2017, 06:12 PM porschetub You need the earlier "pie plate" type fl... Dec 15 2017, 03:24 PM Mark Henry Or if you have a good flat flywheel you can use a ... Dec 15 2017, 07:02 PM Larmo63 I used the Kennedy 228mm flywheel, PP, & bigge... Dec 15 2017, 07:33 PM GeorgeRud Especially helps when the wiring is also 40+ years... Dec 16 2017, 04:38 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th May 2024 - 07:48 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.