 Relay Board - 73, what should this look like? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| seanpaulmc |
 Feb 8 2018, 12:17 PM
Post
#1
|
|
Member  Group: Members Posts: 414 Joined: 6-December 16 From: Orlando, FL Member No.: 20,649 Region Association: South East States 
 |
Here is a picture of the engine compartment Relay Board of my '73. Will someone post a picture of what this should look like?
I've had the car for a short time and am learning about all the wiring work arounds. Note the car is running carbs. Three things I'll point out in this picture are: 1. The ignition harness coming off the board has a red crimped connector in it. Might need one of Jeff's new harnesses (?). 2. The brown (ground) wire on the left bottom is unconnected. Where should it run to? 3. Bottom right of photo is a blue wire coming from under the dash - will deal with in a later posting. Not in the photo, the ignition key has been bypassed with a push button installed on the dash. Still needs key in and on to start.  |
   |
 
|
Posts in this topic
seanpaulmc Relay Board - 73 Feb 8 2018, 12:17 PM
914Sixer The relay board itself is correct. Lots of extra ... Feb 8 2018, 12:57 PM 1adam12 Bottom left where you have that brown wire coming ... Feb 8 2018, 01:36 PM SirAndy what should this look like?
A lot cleaner ...
:FER... Feb 8 2018, 01:48 PM malcolm2 http://bowlsby.net/914/Classic/TechNotebook.htm
... Feb 8 2018, 01:50 PM SirAndy 2. The brown (ground) wire on the left bottom is u... Feb 8 2018, 01:52 PM
Jeff Bowlsby
2. The brown (ground) wire on the left bottom is ... Feb 9 2018, 10:25 AM gothspeed
[quote name='SirAndy' post='2576584' date='Feb 8 ... Feb 9 2018, 02:15 PM Jeff Bowlsby
Use it as is. Only the AAR branch (white wire) ... Feb 9 2018, 03:58 PM SirAndy
Use it as is. Only the AAR branch (white wire) ... Feb 9 2018, 05:06 PM Dave_Darling
If i remember correctly that wire is always hot, ... Feb 10 2018, 02:06 PM gothspeed Andy, Is there a reason this lug is not in the con... Feb 8 2018, 02:34 PM SirAndy Andy, Is there a reason this lug is not in the con... Feb 8 2018, 03:44 PM gothspeed
Andy, Is there a reason this lug is not in the co... Feb 8 2018, 11:58 PM Jeff Bowlsby
Andy, Is there a reason this lug is not in the co... Feb 8 2018, 03:48 PM SirAndy Andy, Is there a reason this lug is not in the con... Feb 8 2018, 09:15 PM gothspeed
Use it as is. Only the AAR branch (white wire)... Feb 9 2018, 07:59 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd February 2026 - 11:50 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.