 Front Seats bar Bushings, Stock Bar |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Rob-O |
 Mar 15 2018, 01:43 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,252 Joined: 5-December 03 From: Mansfield, TX Member No.: 1,419 Region Association: Southwest Region 
 |
want to replace the factory sway bar bushings. The drop link bushings should be easy. I have a question about the bushing that is through the body. If it’s a stock bar and I take off the bolts holding the outer triangle plate off to get the bushing out, is the inner triangle plate going to stay put? I’ve seen pictures of the triangle portion with just two captive nuts on it. I’ve seen pictures of the triangle plate welded to the inside of the gas tank area. I’ve seen pictures of the triangle plate just loose inside the gas tank area while the sway bar is out. Can I pull the outer triangle plate off, replace the bushing and reassemble without having to pull the gas tank?
|
   |
 
|
Posts in this topic
Rob-O Front Seats bar Bushings Mar 15 2018, 01:43 PM
Mikey914 Yes if factory it will be welded. Mar 15 2018, 03:36 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th June 2024 - 03:19 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.