Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Oil smoke question
isdyl
post Aug 21 2018, 02:20 AM
Post #1


Member
**

Group: Members
Posts: 113
Joined: 13-June 18
From: Woking, UK
Member No.: 22,217
Region Association: England



Hi, I wonder if I could get some advise please. I've bought a 1974 1.7 which was imported to the uk and I'm currently restoring. I noticed the oil level was above the maximum but thought I'd deal with that before starting the engine. I had to do some welding underneath and jacked up the passenger side quite high to gain access, and a load of oil came out from somewhere on the drivers side! I couldn't see where it came from but must have been about a pint/half litre. Anyway, I got the car running just afterwards and it sounds fine. Only problem is that after it warms up (about 5 minutes) it starts belching out white/grey smoke from the exhausts. There is also a fair amount of oil ON the exhaust which starts burning off too and the whole car stinks of burning oil! I think the oil ON the exhaust should burn off soon enough, but is there a chance that I have somehow filled the exhaust with oil by tipping the car up? Or could it be something different/worse? It has an after market sort of 4 pipe exhaust system which is rusty and looks a pig to get off. I'll try and add a photo.
Many thanks for any advise. Regards DylanAttached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
isdyl   Oil smoke question   Aug 21 2018, 02:20 AM
falcor75   That it starts smoking after its warmed up is odd....   Aug 21 2018, 05:01 AM
cuddy_k   My guess is that the pushrod tube seals are leakin...   Aug 21 2018, 07:15 AM
isdyl   Thanks for the ideas - most of the burning oil smo...   Aug 21 2018, 08:52 AM
cuddy_k   Thanks for the ideas - most of the burning oil sm...   Aug 21 2018, 01:58 PM
Ansbacher   Five minutes then smoke- those were my exact sympt...   Aug 21 2018, 10:10 AM
isdyl   Seems to keep going but I haven't run it longe...   Aug 21 2018, 02:55 PM
Mark Henry   Oil is fine, 15/40 is what I'd recommend for y...   Aug 21 2018, 03:02 PM
Mark Henry   Also check your valve cover seals, old ones tend t...   Aug 21 2018, 03:04 PM
Mark Henry   Just an FYI the PR seals/tubes can be done in car ...   Aug 21 2018, 03:28 PM
Dave_Darling   The "jacked up the right side and oil came ou...   Aug 21 2018, 03:32 PM
Rand   As Dave asked... WHERE the smoke is coming from is...   Aug 21 2018, 03:38 PM
motorvated   When I first got my '75 1.8 L-Jet it would idl...   Aug 21 2018, 06:19 PM
jcd914   If you jacked the car up at enough of an angle and...   Aug 22 2018, 12:09 AM
isdyl   If you jacked the car up at enough of an angle an...   Aug 22 2018, 11:00 AM
isdyl   Many thanks for your advise on this. The shaft is...   Aug 22 2018, 12:51 AM
cuddy_k   Hi Dylan, I think you’re at a bit of a “come ...   Aug 22 2018, 01:03 PM
motorvated   When you converted to the carb, I'm assuming t...   Aug 22 2018, 05:00 PM
isdyl   Hi - great advise thanks, and that is definitely w...   Aug 23 2018, 04:44 AM
isdyl   The smoke seems to have cleared if anyones interes...   Sep 10 2018, 01:41 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 7th June 2024 - 09:48 PM