 Stock 15 mm swaybar install, Drop link and bar |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| sholman5 |
 Sep 3 2018, 01:17 PM
Post
#1
|
|
Kraut burner  Group: Members Posts: 189 Joined: 11-September 16 From: Ormond beach, Fl. Member No.: 20,391 Region Association: South East States 
 |
Installing a stock 15mm swaybar, but before I snug everything up. The drop links are angled at one end, does the angled end attach to the arm that goes on to the bar and the straight end to the control arm? I did notice that the drop link is the same perpendicular angle as the strut. Logically it seems correct just wanting to make sure. Also, how much of the swaybar should be sticking out from the arm?
Thnx Chris   |
   |
 
|
Posts in this topic
sholman5 Stock 15 mm swaybar install Sep 3 2018, 01:17 PM
cuddy_k On my install, the drop links clearly fit better o... Sep 3 2018, 02:04 PM 914_teener You should index the bar when the car is on the gr... Sep 3 2018, 08:01 PM
cuddy_k
You should index the bar when the car is on the g... Sep 3 2018, 08:45 PM xperu
Installing a stock 15mm swaybar, but before I snu... Sep 3 2018, 08:27 PM 914_teener Yes. Sep 4 2018, 12:28 AM cuddy_k Hmmm. The shop manual makes no mention of wheels n... Sep 4 2018, 07:35 AM 914_teener If you have noticed the stock droplinks are a fixe... Sep 4 2018, 09:32 AM 914_teener I think the other thing that I was concerned about... Sep 4 2018, 09:38 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th June 2024 - 06:50 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.