 Oil pressure relief valve plug- I have a leak after installing Tangerine piston etc, Can we use one of these plugs? I can’t get the stock one tight |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| DRPHIL914 |
 Jan 18 2020, 10:42 AM
Post
#1
|
|
Dr. Phil  Group: Members Posts: 5,767 Joined: 9-December 09 From: Bluffton, SC Member No.: 11,106 Region Association: South East States 
 |
This has been in car for over a year but while under the car doing the shift rod and bushing, noticed I have a leak- looks to be from this location, and I cannot get it tighter, and that slot in the plug is horrible design. I am wondering if we can use one of these other plugs with a hex head on it?? And FYI it’s not the stock plunger and spring it’s the Tangerine one.
Attached thumbnail(s)  
|
   |
 
|
Posts in this topic
DRPHIL914 Oil pressure relief valve plug- I have a leak after installing Tangerine piston etc Jan 18 2020, 10:42 AM
ChrisFoley The only way you can use a different retaining scr... Jan 18 2020, 11:18 AM
DRPHIL914
The only way you can use a different retaining sc... Jan 18 2020, 11:22 AM cuddy_k What kind of crush washer are you using? Jan 18 2020, 11:27 AM framos914
What kind of crush washer are you using?
I have... May 18 2020, 04:54 PM Amphicar770
What kind of crush washer are you using?
I hav... May 18 2020, 05:41 PM HAM Inc I used to weld a M8 Nut to the bottom of my plugs ... May 18 2020, 06:01 PM cary
I used to weld a M8 Nut to the bottom of my plugs... May 18 2020, 10:43 PM HAM Inc
I used to weld a M8 Nut to the bottom of my plugs... May 19 2020, 05:44 AM cuddy_k Have you tried putting a small chisel in the slot ... May 18 2020, 07:15 PM Olympic 914 Going back to the part the Dr. Phil showed, How ha... May 19 2020, 07:12 AM 02loftsmoor Guys there are tools for this you may have to gri... May 19 2020, 07:18 AM Mblizzard Drag link and new crush washer typically so
Vet th... May 19 2020, 08:18 AM 02loftsmoor
Drag link and new crush washer typically so
Vet t... May 19 2020, 09:14 AM DRPHIL914
[quote name='HAM Inc' post='2816627' date='May 18... May 21 2020, 05:32 AM DRPHIL914 a couple things to consider and a load of infor if... May 21 2020, 06:22 AM ChrisFoley Phil,
my product is 100% my idea and follows a dif... May 21 2020, 06:48 AM DRPHIL914
Phil,
my product is 100% my idea and follows a di... May 21 2020, 07:23 AM DRPHIL914 here are some pics of the 2 plugs, from different ... May 21 2020, 07:30 AM ChrisFoley A direct comparison with the 914 plug would be mor... May 21 2020, 07:52 AM DRPHIL914 the last picture is a 914 plug next to the newer h... May 21 2020, 08:55 AM ChrisFoley That is not a 914 plug Phil. The 911 plug is not l... May 21 2020, 11:12 AM ChrisFoley This is a 914 plug
May 21 2020, 11:17 AM DRPHIL914
That is not a 914 plug Phil. The 911 plug is not ... May 21 2020, 11:25 AM ChrisFoley well,, maybe it's because 356devotion says it ... May 21 2020, 11:35 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th May 2024 - 02:04 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.