 Can’t get good shift on the racecar - transmission drop time? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Tdskip |
 Mar 19 2020, 07:07 PM
Post
#1
|
|
Advanced Member  Group: Members Posts: 3,686 Joined: 1-December 17 From: soCal Member No.: 21,666 Region Association: None 
 |
Soooo close, or maybe not, actually driving this thing. The last item is getting a shifting down. I put a new coupler on a shifter that Bruce made sure was correct in its dimensions.
Good coupler and bushings, firewall bushing a bit marginal, console one is fine. Come screws all aligned and tight. Clutch cable adjusted properly. Clutch pedal actuating properly. Aligned the shifter to rod per instructions and per the last two I’ve done. Can’t get a clean shift with the car running, getting a grind in every gear. Car not running and clutch in and it’s physically hard to move the lever into gear.. Drained the oil and it was used but not terrible, no water or foreign matter. That suggested to me that I need to drop the transmission since the clutch or pressure plate is an issue? Anyone with other ideas? Thanks! |
   |
 
|
Posts in this topic
Tdskip Can’t get good shift on the racecar - transmission drop time? Mar 19 2020, 07:07 PM
eric9144 Any noise coming from things with car off and tryi... Mar 20 2020, 01:35 PM Mark Henry Give the shifter coupler a couple more goes, usual... Mar 20 2020, 04:08 PM
914Toy
Give the shifter coupler a couple more goes, usua... Mar 21 2020, 08:06 AM gms let me understand this, you have the engine runnin... Mar 20 2020, 05:10 PM Nacho Have you tried a different driver? :lol4: just ki... Mar 20 2020, 05:43 PM Tdskip Hi guys - thanks for the ideas.
To be clear - I h... Mar 20 2020, 07:24 PM wndsrfr
Hi guys - thanks for the ideas.
To be clear - I ... Mar 20 2020, 08:11 PM Spoke
When I manage to get the car into a gear when the... Mar 21 2020, 05:10 PM Tdskip I don’t have excessive slack not but worth a sho... Mar 20 2020, 08:14 PM 914 Ranch No slack at all. Tighten it right up, you should n... Mar 21 2020, 04:40 AM Tdskip
No slack at all. Tighten it right up, you should ... Mar 21 2020, 07:41 AM Tdskip I am getting all the gears now with the car off, s... Mar 21 2020, 12:00 PM Tdskip Clutch tube not moving at firewall.
With clutch f... Mar 21 2020, 12:30 PM wndsrfr
Clutch tube not moving at firewall.
With clutch ... Mar 21 2020, 07:32 PM porschetub Grinding in all gears would indicate the clutch is... Mar 21 2020, 01:49 PM Tdskip Thanks @porshetub
Hope you and your family are al... Mar 21 2020, 02:36 PM r_towle Washer under pivot arm
Heat and bend pivot arm (do... Mar 21 2020, 03:20 PM roblav1 This sounds like a clutch not disengaging issue. ... Mar 21 2020, 03:40 PM screenguy914 If the clutch cable is fully adjusted, yet the clu... Mar 21 2020, 05:52 PM Nacho
If the clutch cable is fully adjusted, yet the cl... Mar 21 2020, 07:41 PM Tdskip Thanks for all of the responses.
Going to try ad... Mar 21 2020, 08:40 PM Tdskip Success!
Played around with Clutch cable sett... Mar 22 2020, 03:09 PM wndsrfr
Success!
Played around with Clutch cable set... Mar 22 2020, 08:14 PM Tdskip
:Qarl: :Qarl: :Qarl:
Now drive it like you s... Mar 22 2020, 08:19 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 10:37 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.