 High Idle, screw in the buterfly hole. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| CheeRS |
 Apr 16 2020, 03:33 PM
Post
#1
|
|
Member  Group: Members Posts: 93 Joined: 5-May 19 From: Paris France Member No.: 23,093 Region Association: France  |
Bonsoir,
I bought in France a few monthes ago an import from US 2.0 GA. Great car, rust free, dolphin green but re painted but Ray Charles or Stevie in red. I started a big service of the car to fix all the small PB it has. First one is a very high idle. Throttle seems to be a very high mileage one, there are some spaces between the buterfly and the body. This is perhaps why the hole in the butterfly is closed by a screw in it. With the idle air screw fully closed, idle is at 1600, turning the screw operate on the idle, but could only make it higher. Tomorrow I will check ignition timing. It seems to me there is no air leak, the only one is across the buterfly play. Is it a common fail ? Should I re-put the screw in the hole ? Thanks CheeRS |
   |
 
|
Posts in this topic
CheeRS High Idle, screw in the buterfly hole. Apr 16 2020, 03:33 PM
second wind Sounds like a timing issue to me. Had the same pr... Apr 16 2020, 07:06 PM TheCabinetmaker Vacuum leak! Apr 17 2020, 06:00 AM Mark Henry Or very poorly adjusted linkage. Apr 17 2020, 08:57 AM CheeRS Some works on the car today.
Timing is OK.
Found a... Apr 21 2020, 02:47 PM CheeRS
Where could I find this part ?
Without this vac... Apr 21 2020, 02:57 PM yellowporky https://900designs-container.zoeysite.com/b...with... Apr 21 2020, 03:21 PM CheeRS whaou ;-) thank U Apr 21 2020, 03:33 PM Rand I wouldn't go to timing issue first. Well, I m... Apr 21 2020, 03:39 PM CheeRS The system is a stock Djet GA engine.
No modificat... Apr 22 2020, 03:19 PM
StarBear :Qarl: Yet another success story! Apr 22 2020, 03:41 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th June 2024 - 09:15 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.