 Slightly fast idle - suspect AAV, Am I right? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| gturner008 |
 May 14 2020, 06:29 AM
Post
#1
|
|
Member  Group: Members Posts: 127 Joined: 21-April 20 From: Toronto Member No.: 24,163 Region Association: Canada  |
Owned 76 2.0 for two weeks now.
Lots of little jobs completed. But I have an idle that’s 1100 rpm. The idle screw is virtually fully in. I suspect the AAV is stuck slightly open when engine hot. If I pull the tube from the air intake and put my thumb over it, the revs drop to about 600 rpm. Everything else is good. All hoses correct and no leaks. Am I right in thinking the AAV should close up completely? If it’s a stuck AAV, any recommendations for getting it freed up? Cheers. Gary |
   |
 
|
Posts in this topic
gturner008 Slightly fast idle - suspect AAV May 14 2020, 06:29 AM
BeatNavy Fast idle is normally caused by vacuum leak and/or... May 14 2020, 06:46 AM gturner008 Many thanks. The drop to 600 rpm I think could eas... May 14 2020, 08:05 AM ClayPerrine :wttc:
Glad you are here.
:ttiwwp:
We wan... May 14 2020, 08:45 AM gturner008 Work in progress May 14 2020, 09:52 AM windforfun What's the AAR or AAV? May 14 2020, 09:57 AM
Dave_Darling
What's the AAR or AAV?
Auxiliary Air Regula... May 14 2020, 12:22 PM pete000 Sure doesn't take much of a leak to reek havoc... May 14 2020, 11:12 AM gturner008 Update.
Removed AAV or ARR, cleaned. Put 12v thr... May 14 2020, 12:33 PM euro911 IIRC, there's two idle adjustment locations on... May 14 2020, 12:41 PM BeatNavy Great job! You may have a small vac leak some... May 14 2020, 12:42 PM gturner008 Thanks Mark and Rob,
I'll give the ECU a twea... May 14 2020, 01:06 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 01:52 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.