 -6 throttle cable(resurrection) |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914andy |
 Jun 11 2020, 08:33 AM
Post
#1
|
|
Member  Group: Members Posts: 59 Joined: 23-December 11 From: Nashville tn Member No.: 13,929 Region Association: None 
 |
Things are progressing well...engine runs,carbs clean, fresh oil & filter, clutch is working and now adjusted.
It appears to me that the only thing closing the throttle is the return spring on each bank of carbs. When working the carbs from the engine bay everything is ok. Using the peddle ...not so good. Linkage pivot shaft on carb is cleaned and lubed...Pivot shaft on trans is cleaned and lubed. Looking at the parts diagram...is the throttle cable 2 pieces? Do you have to remove the female end of the ball socket to get it out of the tube in the tunnel? I'm thinking there my be some crud in the tube/ tunnel. Any other springs that I might be missing? Thanks for the positive comments and of course all the help Andy |
   |
 
|
Posts in this topic
914andy -6 throttle cable(resurrection) Jun 11 2020, 08:33 AM
brant could the throttle cable be wrapped around somethi... Jun 11 2020, 08:45 AM gereed75 All one piece. When you remove the threaded socket... Jun 11 2020, 09:01 AM
wndsrfr
All one piece. When you remove the threaded socke... Jun 11 2020, 09:28 AM 914andy Thanks... of to see what I can find.
I like the id... Jun 11 2020, 09:08 AM gereed75 Saw this arrangement once on a race car. Nice thi... Jun 11 2020, 09:17 AM IronHillRestorations You've got to take the ball socket and jamb nu... Jun 11 2020, 09:27 AM ctc911ctc I would check this thread
http://www.914world.com... Jun 11 2020, 09:55 AM 914andy Once I had the front and back ends disconnected, c... Jun 11 2020, 11:16 AM johnhora Is your trans bell crank a 914-6 one or 911....the... Jun 11 2020, 12:14 PM Retroracer
Is your trans bell crank a 914-6 one or 911....th... Jun 11 2020, 05:54 PM Mark Henry I only have the 2 Weber springs, it can be done.
... Jun 11 2020, 03:10 PM wndsrfr
I only have the 2 Weber springs, it can be done. ... Jun 11 2020, 03:51 PM Mark Henry
The spiral springs are also there...around the s... Jun 11 2020, 04:58 PM porschetub I found bushes were worn out @ both bellcranks the... Jun 11 2020, 03:46 PM 914andy It turns out that the trans bell crank was bent. S... Jun 12 2020, 05:49 AM roblav1 I'm about to do this in a different way today ... Jun 12 2020, 08:34 AM 914Toy I have an 8' long similar diameter generic cab... Jun 12 2020, 09:45 AM 914Toy Correction, I bought a 10 ft cable which fits perf... Jun 12 2020, 10:48 AM fixer34 Had mine out, took a picture. I added a large retu... Jun 14 2020, 07:33 PM 914andy I like that idea also...maybe even more than topsi... Jun 14 2020, 09:46 PM Movin6 Replying to an old thread, so shoot me, LOL Found ... Jun 14 2021, 01:13 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th June 2024 - 04:00 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.