 Installing all new brake calipers on all 4's. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| surfdogskier |
 Jul 1 2020, 08:16 AM
Post
#1
|
|
Member  Group: Members Posts: 164 Joined: 20-May 16 From: East TN Member No.: 20,019 Region Association: None  |
So I decided to bite the bullet and get refurbished brake calipers for all sides. One of mine was toast, back driver side and front looked like it needed a good rebuild anyway.
1. Should I pre-fill the calipers with fluid? 2. If figure I should only do one at a time and bleed the air out before going to the next, correct? 3. DOT 3 brake fluid or other. Thanks, Jason |
   |
 
|
Posts in this topic
surfdogskier Installing all new brake calipers on all 4's. Jul 1 2020, 08:16 AM
ClayPerrine Paging Eric Shea. Duke of Deceleration, please pi... Jul 1 2020, 08:23 AM Mikey914 No need to pre fill the calipers.
If the calipers ... Jul 1 2020, 08:36 AM mepstein Replace rubber soft lines if it’s been a while. ... Jul 1 2020, 09:07 AM Frankvw Hi, great when you have all 4 new !
I started ... Jul 1 2020, 09:34 AM 914werke A fun task was to set the clearance on the rear b... Jul 1 2020, 09:39 AM davep Yes, if replacing calipers, definitely replace the... Jul 1 2020, 09:46 AM rjames Do a search and you'll find several methods th... Jul 1 2020, 09:53 AM
surfdogskier Thanks for all the suggestions. Look forward to g... Jul 1 2020, 09:08 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2024 - 08:15 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.