Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Brake system flush, Removing silicone fluid
EJP914
post Apr 18 2021, 06:06 PM
Post #1


Member
**

Group: Members
Posts: 260
Joined: 14-June 03
From: Monroeville, PA
Member No.: 821



I am trying to flush out the rest of the silicone fluid installed by previous owner from my brake system with alcohol using one of those pressure bleeder tanks. Have 3 of the lines closed off with old brake lines crimped shut while working on the one open. I am not running the old silicone fluid thru the new calipers. Pump line is attached to brake fluid reservoir. I can pump the tank up to 10 lbs or a bit more and get alcohol running thru the two front lines.
I cant get anything out of the rear lines. Not enough pressure at 10 lbs?
Is there something in the brake system that would have closed off fluid flow to the rear brakes.
Don't know where to go from here. Would appreciate any suggestions. Thanks.
Ed
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 16th June 2024 - 10:55 PM